You have no items in your shopping cart.
Crown Series 24
Manufacturer: Crown Boilers
Model Number: Crown-Boilers-Series-24
OverviewTen reasons why you need the SERIES 24 commercial boiler:
Its a CROWN! Satisfied customers are our goal. So, all Crown boilers employ the latest technology for performance and safety.
Cast iron construction Cast iron heat exchanger sections and push nipples provide long life. Cast iron resists the effect of petroleum-based chemicals such as corrosion inhibitors, pump lubricants and antifreeze. Cast iron push nipples are important because they expand and contract at the same rate as the sections they join, which provides integrity to the entire assembly
Hot water or steam The SERIES 24 has been designed to meet a wide variety of installations.
Gas, oil or combination gas/oil fired - Customers preference in the choice of fuels for economy and availability may be an important part of the purchase decision.
Easy assembly Once in place, the sections are easily assembled using a 3/4-inch drive ratchet with a 1-1/16-inch-deep socket and a wrench. Short draw rods pass through the sections reinforced lugs, resulting in fast, strain-free assembly.
Hassle-free maintenance All regular maintenance access areas are located on the left side, allowing the SERIES 24 to be installed 9 inches from the right sidewall. Removable jacket panels and flue cover plates simplify access to the heating surfaces.
Versatile venting options The SERIES 24 is a forced draft boiler that eliminates the need for high chimneys or draft inducers. Uniquely, the boiler can be vented from either the top or rear for maximum installation flexibility. Rear outlet venting requires only 6-1/2 feet of vertical clearance from floor to ceiling.
Convenient delivery in sections Delivery is available in easily handled sections that can be maneuvered through doorways and down stairs making this boiler ideal for installations where the boiler room is not readily accessible.
Optimum for large installations Available in 10 sizes from 342,000 to 1,852,000 BTU/hr output.
Tankless heater available for domestic hot water Convenient for small spaces or difficult installations that preclude a separate water heater. Finned copper coil heats water fast, and piping is easier to install.
All Boilers Sections unassembled, flush insulated jacket, burner mounting plate, burner adapter plate, rear flue damper (top outlet optional), flue canopy, rear observation port cover, target wall (V-903A) and miscellaneous plugs, bushings and fittings.
Steam Trim 15 PSI safety valve, L404A pressuretrol, gauge glass assembly, steam gauge.
Water Trim 30 PSI safety relief valve, L4006A high limit, pressure temperature gauge.
Oil Boilers Flange mounted flame retention oil burner furnished with 2 stage fuel unit, primary control and dual oil valves.
Gas Boilers Flange mounted gas burner with standard controls meeting the latest UL requirements, dual gas valves and electronic ignition.
Click here to browse all the Crown Boiler equipment Control Specialties offers.