| |
| |
Peerless 8796 Pump
Manufacturer: Peerless
Call For Quote
Description:
The Peerless Pump 8796 Series pumps are manufactured for a wide range of flow and head requirements. Besides being price competitive, the 8796 Series pumps are engineered to lower your operating costs. Save on installation, because these pumps will lift corrosive, toxic, or abrasive liquids from a depth of up to 20 feet without the aid of foot valves, check valves, or auxiliary pumps. Save on inventory costs, because the 8796 back-pullout assembly is completely interchangeable with our
8196 ANSI Series. All 8796 Series Power Ends are backed
with Peerless Pump’s three-year warranty.
Applications
The 8796 Series pumps fit a wide range of applications.
They will handle acids, chemicals, or volatile liquids. They
can pump liquids with large quantities of entrained air or gas, such as condensate systems or industrial waste treatment. The 8796 pump is the best choice for tank car unloading, mine or tunnel de-watering, or for any application where the pump doesn’t have flooded suction, or has to be located away from or above the liquid source.
Features
Our special self-priming casing design permits the 8796
pumps to maintain a prime, as well as to expel any air
in the suctioned liquid via the self-venting top centerline
discharge. The unique two-piece pull-apart casing
allows for quick replacement of the inner volute. The inner
volute itself can be provided in a variety of wear-resistant
materials, such as CD4MCu.
Our impellers are a fully open design that resist clogging.
Shear is reduced, resulting in lower losses when pumping
viscous fluids. All impellers also available in an optional
key and bolted design.
The bearing frame is coated internally to ensure zero
contamination of the oil or bearings from the inside. The
VBXD® labyrinth oil seal by Inpro, designed especially for
Peerless Pump, provides both static and dynamic sealing
to protect bearings from environmental contamination.
All bearing fits are precision-bored and all bearings meet or exceed minimum ANSI L10 or 17,500 hours.
The shaft is available in solid shaft construction, or with
a sleeve. The threaded area of the shaft is protected
against corrosion with an O-ring seal on the impeller.
Integral back pump out vanes reduce stuffing box pressure, prolonging mechanical seal or packing life.
Quality Engineering
Peerless Pump designs tough, versatile products to meet
your pumping needs. The 8796 Series delivers variety,
durability, standardized options and configurations
unequalled in the industry.
Specifications
Capacities: .............. Up to 700 gpm (159 m3/hr)
Head: ........................ Up to 400 feet (122 meters)
Pressure: ................. Up to 375 psi (2586 kPa)
Horsepower: ......... Up to 40 hp (30 kW)
Temperature: ......... Up to 500 °F (260 °C)
Drives: ....................... Motors, engines, steam turbine
Liquids: ..................... Clean liquid sumps, chemical and petroleum transfers
Materials: ................. Ductile Iron, 316SS, CD4MCu, Alloy 20
 | | Model Number: | Unit Price | 1.800.752.0556 | | Peerless 8796 Pump | Call For Quote | Request a Quote | |
|
»Back To Peerless Pumps
Peerless Pumps
Control Specialties is your one stop shopping source for all your steam, air, water and vacuum needs. With over 50 years of combined experience at Control Specialties we can provide those hard to find products associated with your steam, air, water and vacuum requirements. We offer fast, prompt service, no minimum orders, no expediting fees, after hours assistance, honor major credit cards and same day shipping.
Take advantage of our in-house repair facilities. We offer repair of all pumps, valves, steam traps and safety relief valves. Repairs can save you substantial money over the cost of a new product - typically 50%. Visit our repair section and lean all about our repair services.
|
|
|
