| |
| |
Armstrong Series PT400
Manufacturer: Armstrong-Lynnwood
Call For Quote
Description:
PT-400 Series Vertical Steel Pump Trap
Fabricated steel—discharge per cycle 7.8 gallons (30 liters)
For pressures to 125 psig (8.5 bar). . .
Capacities to 12,200 lb/hr (5534 kg/hr)
The Armstrong PT-400 Series Vertical Pump Trap is the low-maintenance, non-electric solution to moving condensate or other liquids from low points, low pressures or vacuum spaces to an area of higher elevation or pressure. Condensate can be returned at temperatures well above the 200˚F (93˚C) limit of conventional electric condensate pumps without leaking seals or cavitation problems.
Economical non-electric operation. Uses inexpensive steam air or inert gas.
Low-maintenance operation. No leaking seals, impeller or motor problems means lower maintenance. No NPSH issues.
Lower installation costs. Single trade required for installation and maintenance.
Peace of mind. Standard unit is intrinsically safe—explosion-proof.
Durable construction. ASME code-stamped carbon steel body vessel.
Corrosion resistance. Internals are all stainless steel for corrosion resistance and long life.
Heavy-duty springs. Springs are made from long-lasting Inconel X-750.
Efficiency. A closed loop means no motive or flash steam is lost. All valuable Btu’s are captured and returned to the system.
Safety. The pump can be used in flooded pits without fear of electrocution or circuit breaker defaults.
Externally removable/replaceable seats. Seats can be replaced or cleaned without removing the mechanism assembly.
Typical applications
Low-pressure heating systems
Process heat exchanger or coils with modulating steam control
Remote installations (tracing, tank farms, or remote coils)
Systems under vacuum
Hazardous (explosion-proof) areas
Caustic environments
Sumps or submersed areas
Reboilers
Flash tanks
NOTE: Armstrong can also custom fabricate packages to meet your specific needs. Pre-piped conventional, low-boy, closed-loop and custom-fabricated skid packages are available.
 | | Model Number: | Unit Price | 1.800.752.0556 | | PT400 | Call For Quote | Request a Quote | |
|
»Back To Armstrong Pumps
Armstrong Pumps
Control Specialties is your one stop shopping source for all your steam, air, water and vacuum needs. With over 50 years of combined experience at Control Specialties we can provide those hard to find products associated with your steam, air, water and vacuum requirements. We offer fast, prompt service, no minimum orders, no expediting fees, after hours assistance, honor major credit cards and same day shipping.
Take advantage of our in-house repair facilities. We offer repair of all pumps, valves, steam traps and safety relief valves. Repairs can save you substantial money over the cost of a new product - typically 50%. Visit our repair section and lean all about our repair services.
|
|
|
