Home About Us Repair Center Technical Tips & Info In the Kitchen with Amy Contact Us
Filters/Filtration
Compressed Air
Vacuum
Vacuum Pump Parts
Steam
Pumps
Instrumentation
Process Equipment
Services
Valves
Boilers
Control Valves
Grundfos Pumps
Condensate Pumps
Tylok Fittings and Valves
Rotary Joints and Unions
Johnson Controls
Gearmotors
Industrial Automation
Air Knife Systems
CLOSE OUT - WAREHOUSE CLEARANCE SALE
Chainwheel Operators




 
Call Us. Email Us. Visit Us.


1.800.752.0556
770.532.7736

Contact Us Online


2503 Monroe Drive
Gainesville, GA 30507

 

 

Miller Leaman Thompson MLS-3 Strainer
 


Miller Leaman Thompson MLS-3 Strainer

Manufacturer: Miller Leaman
Model Number: MLS-3

Date of Price: 1/11/2005
Call For Quote

Description:
The Thompson Strainer is a patented stainless steel strainer used on a wide variety of applicaitons to remove solid particles from liquid streams. Our unique product has grown popular due to its patneted, low maintenance design, stainless steel construction and exceptional efficiency.

All models of the Thompson Strainer operate with less than a 1psi pressure loss at maximum flow, when clean. This efficiency results in dependable filtration without constricting your system's flow rate or causing unnecessary pressure loss to downstream equipment.

The Thompson Strainer's internal flow patterson are responsible for making our unique product so effective. As liquid flows up through the internal riser pipe and deflects off the inner surface of the conical shaped screen, heavy sediment is forced downward, away from the screen, into the large debris reservoir. Unlike traditional basket strainers, y-strainers, or bag filters, the Thompson Strainer can be flushed while on-line and in service. Settled debris is easily removed by purging through the debris flush port.

Choosing a strainer with sufficient surface area is critical in any application. The Thompson Strainer has significantly more surface area than most traditional basket and y-strainers. With units available with connection sizes from 2" to 10", accommodating flow rates up to 2,000 gpm (higher flow rates are achieved by manifolding multiple strainers), Miller-Leaman has a strainer that will fit your specific needs. Standard mesh options range from perforated sheet to 75 micron (200 mesh).

The Thompson Strainer is made in the USA.

The Thompson Strainer Model MLS-3 has a maximum 200 gpm with 200 sq in screen surface area. The maximum psi is 125 with a clamp lid and male npt inlet and outlet.


Model Number: Unit Price 1.800.752.0556
MLS-3 Call For Quote Request a Quote


Related Products

Miller Leaman Thompson MLS-2 StrainerMLS-2 Call For Quote
Miller Leaman Thompson MLS-3 StrainerMLS-3 Call For Quote
Miller Leaman Thompson MLS-4C StrainerMLS-4C Call For Quote
Miller Leaman Thompson MLS-4B StrainerMLS-4B Call For Quote
Miller Leaman Thompson MLS-6 StrainerMLS-6 Call For Quote
Miller Leaman Thompson MLS-8 StrainerMLS-8 Call For Quote
Miller Leaman Thompson MLS-10 StrainerMLS-10 Call For Quote
Miller Leaman Thompson MLI-2 FilterMLI-2 Call For Quote
Miller Leaman Thompson MLI-3 FilterMLI-3 Call For Quote
Miller Leaman Thompson MLI-4C FilterMLI-4C Call For Quote
Miller Leaman Thompson MLI-4B FilterMLI-4B Call For Quote
Miller Leaman Thompson MLI-6 FilterMLI-6 Call For Quote
Miller Leaman Thompson MLI-8 FilterMLI-8 Call For Quote
Miller Leaman Thompson MLI-10 FilterMLI-10 Call For Quote
Miller Leaman Helix HD-2NA FilterHD-2NA Call For Quote
Miller Leaman Helix HD-2SA FilterHD-2SA Call For Quote
Miller Leaman Helix HD-3NA FilterHD-3NA Call For Quote
Miller Leaman Helix HD-2NW FilterHD-2NW Call For Quote
Miller Leaman Helix HD-2SW FilterHD-2SW Call For Quote
Miller Leaman Helix HD-3NW FilterHD-3NW Call For Quote
»Back To Water Filtration

Water Filtration
Call Control Specialties with your specifications for water filtration.