SEW Eurodrive Movitrac 07 Variable Frequency Drive

In stock
SKU
00001193

Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.

CONFIRM REAL TIME MARKET PRICE
Add to Wish List
SEW Eurodrive Movitrac 07 Variable Frequency Drive series of variable frequency drives combines the economy and simplicity required in less complex applications such as pumps, fans, agitators, turntables, and conveyors to mention a few. High reliability and ease of setup make the MOVITRAC 07 the ideal solution for low-end application requirements. Product Advantages:
  • Economical solution for variable speed AC motor control
  • Compact size saves installation costs; brake resistor mounts in heat sink for additional space savings
  • Sensorless vector control provides excellent speed regulation and up to 200:1 speed range
  • Integrated operator keypad features speed pot and one-touch access to most-used parameters Specifications:
  • 0.5 3HP with single-phase input voltage 200 240 VAC 10% 50/60 Hz
  • 0.5 40HP with three-phase input voltage 200 240 VAC 10% 50/60 Hz
  • 0.75 60HP with three-phase input voltage 380 500 VAC 10% 50/60 Hz
  • 150% current overload for up to 60 seconds and 125% continuous
  • Standard 4-quadrant operation
  • Maximum 16kHz carrier frequency
  • Programmable I/O:
  • Digital 5 in/2 out
  • Analog 1 in
  • Integrated input filter for Level B compliance to EN55011 (up to 15HP/460 VAC and 10HP/230 VAC) Control Features:
  • Integrated speed pot for local speed control
  • Up to six preset speeds
  • Built-in PI controller
  • 3-wire control
  • Motorized potentiometer function
  • Peer-to-peer networking with other MOVITRAC 07, MOVIMOT, and MOVIDRIVE units via high-speed S-bus or RS-485
  • Motor stall prevention
  • Automatic motor brake control for prevents load from sagging in vertical applications
  • Built-in motor thermistor supply and evaluation
  • PC setup and programming via MOVITOOLS software suite

    Need additional assistance? CONTACT US

  • SEW-Eurodrive’s MOVITRAC 07 series of variable frequency drives combines the economy and simplicity required in less complex applications such as pumps, fans, agitators, turntables, and conveyors to mention a few. High reliability and ease of setup make the MOVITRAC 07 the ideal solution for low-end application requirements.

    Product Advantages:

    • Economical solution for variable speed AC motor control
    • Compact size saves installation costs; brake resistor mounts in heat sink for additional space savings
    • Sensorless vector control provides excellent speed regulation and up to 200:1 speed range
    • Integrated operator keypad features speed pot and one-touch access to most-used parameters

    Specifications:

    • 0.5 3HP with single-phase input voltage 200 240 VAC 10% 50/60 Hz
    • 0.5 40HP with three-phase input voltage 200 240 VAC 10% 50/60 Hz
    • 0.75 60HP with three-phase input voltage 380 500 VAC 10% 50/60 Hz
    • 150% current overload for up to 60 seconds and 125% continuous
    • Standard 4-quadrant operation
    • Maximum 16kHz carrier frequency
    • Programmable I/O:
    • Digital 5 in/2 out
    • Analog 1 in
    • Integrated input filter for Level B compliance to EN55011 (up to 15HP/460 VAC and 10HP/230 VAC)


    Control Features:

    • Integrated speed pot for local speed control
    • Up to six preset speeds
    • Built-in PI controller
    • 3-wire control
    • Motorized potentiometer function
    • Peer-to-peer networking with other MOVITRAC 07, MOVIMOT, and MOVIDRIVE units via high-speed S-bus or RS-485
    • Motor stall prevention
    • Automatic motor brake control for prevents load from sagging in vertical applications
    • Built-in motor thermistor supply and evaluation
    • PC setup and programming via MOVITOOLS software suite
    Write Your Own Review
    You're reviewing:SEW Eurodrive Movitrac 07 Variable Frequency Drive
    @ 2023 Magento Demo Store. All Rights Reserved.