Fisher Type 67CFR-235 Instrument Supply Regulator w/ Brass Gauge
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
Fisher Type 67CFR-235 Instrument Supply Regulator with Brass Gauge are typically used to provide constantly controlled, reduced pressures to pneumatic and electropneumatic controllers and other instruments. The 67C Series are suitable for most air or gas applications. Other applications include providing reduced pressure for air chucks, air jets, and spray guns. Specifications:
- 0-35 psi; brass gauge
- Body Material: Aluminum
- Body Size and End Connection: 1/4 NPT
- Maximum Inlet Pressure: 250 psig / 17.2 bar
- Maximum Emergency Outlet Pressure: 50 psi / 3.4 bar over outlet setting
- Temperature Capabilities: NBR: -40 to 180°F / -40 to 82°C || FKM: 0 to 300°F / -18 to 149°C || Silicone (VQM) Diaphragm and Low Temp Bolting: -60 to 180°F / -51 to 82°C
Need additional assistance? CONTACT US
The 67C Series air pressure regulators are typically used to provide constantly controlled, reduced pressures to pneumatic and electropneumatic controllers and other instruments. These direct-operated regulators are suitable for most air or gas applications. Other applications include providing reduced pressures to air chucks, air jets, and spray guns. The Type 67CFR-235 are filtered regulators having an internal relief valve with a soft seat for reliable shutoff with no discernible leakage. This regulator has a spring range 0-35#. This regulator comes with a brass gauge with 0 to 30 psi.
