Honeywell C7027, C7035, C7044, C7927 Series Minipeeper Ultraviolet Flame Detector detect the ultraviolet radiation emitted by combustion flames. Use these flame detectors with Honeywell flame safeguard controls to provide flame supervision for gas, oil, or combination gas-oil burners.
C7027A, C7035A, and C7044A Flame Detectors are used with RA890G devices or R7249A, R7290A, R7749B and R7849A,B Amplifiers and the appropriate Honeywell controls.
C7927A is used with only the R7851B Flame Amplifier and the 7800 SERIES controls.
C7044A may also be used with the following 50 Hz Honeywell combustion controls/amplifiers: — R4341/R7323 — R4343/R7323 — R4344/R7323
C7027A/C7927A has an integral collar threaded (internal 1/2-14 NPSM) for mounting on a one-half-inch sight pipe.
C7035A has an integral collar threaded (internal 1-11-1/2 NPSM) for mounting on a one-inch sight pipe.
C7035A housing meets Underwriters Laboratories Inc. requirements for rain tightness and complies with NEMA enclosure standards, types 4 and 4X.
C7044A mounts with a two screw bracket. The UV sensor tube is enclosed in a stainless steel housing.
C7044A has the capability of side or end viewing in flame monitoring applications.
C7035A ultraviolet radiation sensor tube is field replaceable.
C7927A1016, C7027A1049, C7027A1064, C7027A1072 come with 1/2-in. spud connection for electrical wiring.
Honeywell C7027, C7035, C7044, C7927 Series Minipeeper Ultraviolet Flame Detector detect the ultraviolet radiation emitted by combustion flames. The flame detectors are used with Honeywell flame safeguard controls to provide flame supervision for gas, oil, or combination gas-oil burners.
