Armstrong Lynnwood 3032 Water Hose Station
In stock
SKU
00001068
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
The Armstrong Lynnwood 3032 Water Hose Station works with hot and cold water and utilises the Rada 320 Thermostatic Mixing Valve supplied with integral risers for simultaneous on/off control of both inlet supplies. The unit is installed on a stainless steel hose rack that is suitable for wall or column installation.
The Lynnwood 3032 Water Hose Station is an Armstrong hot and cold water hose station that replaces the basic Mixing Y with a Rada® 320 thermostatic mixing valve as the primary water temperature controller. With the Rada 320 you can:
•Change outlet water temperature from full cold to the field-adjustable maximum limit stop in a single handle turn
•Set and lock to a single temperature and maintain outlet temperatures +/-2˚F (1˚C) in the event of inlet pressure and/or temperature fluctuation or change
•Protect the operator a thermal-shutdown feature if the cold water inlet supply fails
Supplied as 3031 mounted on a heavy-duty stainless steel single-piece hose rack suitable for wall or column installation. The unit is supplied fully assembled and pressure-tested with strain relief and a 3/4” (20 mm) coupling for hose attachment. Inlet check valves are strongly recommended.
Assembly 3032SPremium
This unit is the same as the 3032, with the addition of corrosion-resistant industrial nickel-plated components and integral spring-loaded check valves.
IMPORTANT NOTE: Thermostatic products used by our competitors for this application cannot provide a temperature range from full cold to the field-adjustable maximum limit stop. Nor can they access temperatures within 5°F (2°C) of either inlet supply temperature.
Various hose lengths, spray nozzles and hose reels are available as options for Armstrong hot and cold water hose stations.
Click here to browse all the Armstrong equipment Control Specialties offers.
Control Specialties is your best source for Lynnwood 3032 Water Hose Station. On Call 24/7, with no minimum orders, same day shipping, plus repair services.
•Change outlet water temperature from full cold to the field-adjustable maximum limit stop in a single handle turn
•Set and lock to a single temperature and maintain outlet temperatures +/-2˚F (1˚C) in the event of inlet pressure and/or temperature fluctuation or change
•Protect the operator a thermal-shutdown feature if the cold water inlet supply fails
Supplied as 3031 mounted on a heavy-duty stainless steel single-piece hose rack suitable for wall or column installation. The unit is supplied fully assembled and pressure-tested with strain relief and a 3/4” (20 mm) coupling for hose attachment. Inlet check valves are strongly recommended.
Assembly 3032SPremium
This unit is the same as the 3032, with the addition of corrosion-resistant industrial nickel-plated components and integral spring-loaded check valves.
IMPORTANT NOTE: Thermostatic products used by our competitors for this application cannot provide a temperature range from full cold to the field-adjustable maximum limit stop. Nor can they access temperatures within 5°F (2°C) of either inlet supply temperature.
Various hose lengths, spray nozzles and hose reels are available as options for Armstrong hot and cold water hose stations.
Click here to browse all the Armstrong equipment Control Specialties offers.
Control Specialties is your best source for Lynnwood 3032 Water Hose Station. On Call 24/7, with no minimum orders, same day shipping, plus repair services.
Write Your Own Review