Armstrong GP2000CS Externally Piloted Pressure Regulating Valve, Carbon Steel Body
In stock
SKU
00001162
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
The Armstrong GP2000CS Externally Piloted Pressure Regulating Valve, Carbon Steel Body is a high-performance, externally piloted reducing valve for large-capacity requirements. Typical use is on intermittent service, including applications such as heat exchangers, steam coils, rotating dryers, process equipment and heating systems.
REMINDER: When inquiring or ordering this product, the following items are required to achieve the correct product for your specific needs.
Pipe Size
PSI (Outlet Spring Range)
End Connection
PPH (Stream Flow Rate)
Need additional assistance? CONTACT US
The Armstrong GP2000 Externally Piloted Pressure Regulating Valve is used in applications using steam service.
The GP-2000 is a high-performance, externally piloted reducing valve for large-capacity requirements. Typical use is on intermittent service, including applications such as heat exchangers, steam coils, rotating dryers, process equipment and heating systems. With a 20:1 rangeability and high Cv, the GP-2000 is reliable and accurate (+/-1% of pressure set point from 5% to 100% of flow) over a long, trouble-free service life. Hardened stainless steel working parts are renewable in-line. The GP-2000 is single-seated for dead-end service, and it is available with both NPT (1/2”2”) (1550 mm) and flanged connections in 2”6” sizes (50150 mm).
Control Specialties is your best source for the Armstrong GP2000 Externally Piloted Pressure Regulating Valve. On Call 24/7, with no minimum orders, same day shipping, plus repair services.
The GP-2000 is a high-performance, externally piloted reducing valve for large-capacity requirements. Typical use is on intermittent service, including applications such as heat exchangers, steam coils, rotating dryers, process equipment and heating systems. With a 20:1 rangeability and high Cv, the GP-2000 is reliable and accurate (+/-1% of pressure set point from 5% to 100% of flow) over a long, trouble-free service life. Hardened stainless steel working parts are renewable in-line. The GP-2000 is single-seated for dead-end service, and it is available with both NPT (1/2”2”) (1550 mm) and flanged connections in 2”6” sizes (50150 mm).
Control Specialties is your best source for the Armstrong GP2000 Externally Piloted Pressure Regulating Valve. On Call 24/7, with no minimum orders, same day shipping, plus repair services.
Write Your Own Review
You May Also Like
Check items to add to the cart or
