Armstrong PT400 Series Vertical Steel Pump Trap
In stock
SKU
00001145
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
The Armstrong PT-400 Series Vertical Steel Pump Trap is constructed of fabricated steel, operates up to pressures of 125 psig (8.5 bar) and has capacities to 12,200 lb/hr (5534 kg/hr)
The Armstrong PT-400 Series Vertical Pump Trap is the low-maintenance, non-electric solution to moving condensate or other liquids from low points, low pressures or vacuum spaces to an area of higher elevation or pressure. Condensate can be returned at temperatures well above the 200F (93C) limit of conventional electric condensate pumps without leaking seals or cavitation problems.
Features:
Economical non-electric operation. Uses inexpensive steam air or inert gas.
Low-maintenance operation. No leaking seals, impeller or motor problems means lower maintenance. No NPSH issues.
Lower installation costs. Single trade required for installation and maintenance.
Peace of mind. Standard unit is intrinsically safe—explosion-proof.
Durable construction. ASME code-stamped carbon steel body vessel.
Corrosion resistance. Internals are all stainless steel for corrosion resistance and long life.
Heavy-duty springs. Springs are made from long-lasting Inconel X-750.
Efficiency. A closed loop means no motive or flash steam is lost. All valuable Btu’s are captured and returned to the system.
Safety. The pump can be used in flooded pits without fear of electrocution or circuit breaker defaults.
Externally removable/replaceable seats. Seats can be replaced or cleaned without removing the mechanism assembly.
Typical applications:
Low-pressure heating systems
Process heat exchanger or coils with modulating steam control
Remote installations (tracing, tank farms, or remote coils)
Systems under vacuum
Hazardous (explosion-proof) areas
Caustic environments
Sumps or submersed areas
Reboilers
Flash tanks
NOTE: Armstrong can also custom fabricate packages to meet your specific needs. Pre-piped conventional, low-boy, closed-loop and custom-fabricated skid packages are available.
Control Specialties is your best source for the Armstrong PT400 Series. On Call 24/7, with no minimum orders, same day shipping, plus repair services.
Features:
Economical non-electric operation. Uses inexpensive steam air or inert gas.
Low-maintenance operation. No leaking seals, impeller or motor problems means lower maintenance. No NPSH issues.
Lower installation costs. Single trade required for installation and maintenance.
Peace of mind. Standard unit is intrinsically safe—explosion-proof.
Durable construction. ASME code-stamped carbon steel body vessel.
Corrosion resistance. Internals are all stainless steel for corrosion resistance and long life.
Heavy-duty springs. Springs are made from long-lasting Inconel X-750.
Efficiency. A closed loop means no motive or flash steam is lost. All valuable Btu’s are captured and returned to the system.
Safety. The pump can be used in flooded pits without fear of electrocution or circuit breaker defaults.
Externally removable/replaceable seats. Seats can be replaced or cleaned without removing the mechanism assembly.
Typical applications:
Low-pressure heating systems
Process heat exchanger or coils with modulating steam control
Remote installations (tracing, tank farms, or remote coils)
Systems under vacuum
Hazardous (explosion-proof) areas
Caustic environments
Sumps or submersed areas
Reboilers
Flash tanks
NOTE: Armstrong can also custom fabricate packages to meet your specific needs. Pre-piped conventional, low-boy, closed-loop and custom-fabricated skid packages are available.
Control Specialties is your best source for the Armstrong PT400 Series. On Call 24/7, with no minimum orders, same day shipping, plus repair services.
Write Your Own Review