Dwyer 2000 Magnehelic Differential Pressure Gages
In stock
SKU
00001448
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
Select the Magnehelic gauge for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely.
Magnehelic Differential Pressure Gages
Indicate Positive, Negative or Differential, Accurate within 2%
Standard Magnehelic Pressure Gage has a large, easy-to-read 4” dial.
Patent Nos. 4,030,365 5,012,378
SPECIFICATIONS
Service: Air and non-combustible, compatible gases. (Natural Gas option available.)
Wetted Materials: Consult factory.
Housing: Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Accuracy: 2% of full scale (3% on -0, -100PA, -125PA, -10MM and 4% on -00, -60PA, -6MM ranges), throughout range at 70F (21.1C).
Pressure Limits: -20” Hg. to 15 psig. (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only.
Temperature Limits: 20 to 140F.* (-6.67 to 60C).
Size: 4” (101.6 mm) Diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8” female NPT duplicate high and low pressure taps - one pair side and one pair back.
Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).
Standard Accessories: Two 1/8” NPT plugs for duplicate pressure taps, two 1/8” pipe thread to rubber tubing adapters and three flush mounting adapterswith screws. (Mounting and snap ring retainer substituted for 3 adapters in MP & HP gage accessories
Indicate Positive, Negative or Differential, Accurate within 2%
Standard Magnehelic Pressure Gage has a large, easy-to-read 4” dial.
Patent Nos. 4,030,365 5,012,378
SPECIFICATIONS
Service: Air and non-combustible, compatible gases. (Natural Gas option available.)
Wetted Materials: Consult factory.
Housing: Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Accuracy: 2% of full scale (3% on -0, -100PA, -125PA, -10MM and 4% on -00, -60PA, -6MM ranges), throughout range at 70F (21.1C).
Pressure Limits: -20” Hg. to 15 psig. (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only.
Temperature Limits: 20 to 140F.* (-6.67 to 60C).
Size: 4” (101.6 mm) Diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8” female NPT duplicate high and low pressure taps - one pair side and one pair back.
Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).
Standard Accessories: Two 1/8” NPT plugs for duplicate pressure taps, two 1/8” pipe thread to rubber tubing adapters and three flush mounting adapterswith screws. (Mounting and snap ring retainer substituted for 3 adapters in MP & HP gage accessories
Write Your Own Review