Fireye EP160 Programmer Module
Out of stock
SKU
00001737
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
Fireye EP160 Programmer Module
The Fireye EP160 programmer modules are used with the FLAME-MONITOR Burner Management Control System (E100 and E110).
Several operational characteristics of the programmer are determined by six (6) dip-switches located on the side of the programmer. These characteristics include forced blower motor start delay (dip-switch 1), extended purge timing (dip-switches 3, 4, 5) and the option requiring the 3-P running interlock circuit to be proven open at the start of the operating cycle (dip-switch 6). Dip-switch 2 is inactive.
Several operational characteristics of the programmer are determined by six (6) dip-switches located on the side of the programmer. These characteristics include forced blower motor start delay (dip-switch 1), extended purge timing (dip-switches 3, 4, 5) and the option requiring the 3-P running interlock circuit to be proven open at the start of the operating cycle (dip-switch 6). Dip-switch 2 is inactive.
Write Your Own Review