Honeywell M7285A1003, 120V Modulating Electric Actuator, Spring Return, Foot Mounted
In stock
SKU
M7285A1003
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
Honeywell M7285A1003, 120V Modulating Electric Actuator, Spring Return, Foot Mounted is used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to position a damper or valve at any point between open and closed.
Features:
Integral spring return returns motor to normal position when power is interrupted.
Integral junction box provides NEMA 3 weather protection if motor is mounted in the upright position.
Motor and circuitry operate from 24 Vac.
Quick-connect terminals are standard--screw terminal adapter is available.
Adapter bracket for matching shaft height of older motors is available.
Motors have field adjustable stroke (90 to 160 degrees).
Integral auxiliary switches are available factory mounted, or can be field added.
Spring return motors can operate valve linkages from power end or auxiliary end shafts for normally closed or normally open valve applications.
All models have dual shafts (slotted and tapped on both ends).
All models have auxiliary switch cams.
Fixed torque throughout the entire voltage range.
Motors are designed for either normally open or normally closed valves and dampers.
Models available with adjustable start (zero) and span.
Models available with 4 to 20 mA input signal.
Models available with 2 to 10 Vdc input signal.
Die-cast aluminum housing.
Application Type: Electric
Fail Safe Mode: Spring Return
Control Signal: Modulating, 4-20 mA
Motor Shaft: Dual ended Shaft
Stroke: Adjustable; 90 to 160 degrees, Asymmetrical
External Auxiliary Switches Available : Yes
Need additional assistance? CONTACT US
Honeywell M7285A1003 - 120V Spring Return Actuator
Write Your Own Review