Honeywell M9185D1004, 24V Modulating Electric Actuator, Spring Return, Foot Mounted
In stock
SKU
M9185D1004
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
Honeywell M9185D1004, 24V Modulating Electric Actuator, Spring Return, Foot Mounted are modulating proportional control motors used with controllers that provide a series 90 output to operate dampers or valves.
Features:
Integral junction box provides NEMA 3 weather protection if motor is mounted in the upright position.
Motor and circuitry operate from 24 Vac.
Quick-connect terminals are standard--screw terminal adapter is available.
Adapter bracket for matching shaft height of older motors is available.
Motors have field adjustable stroke (90 to 160 degrees).
Integral auxiliary switches are available factory mounted, or can be field added.
All models have dual shafts (slotted and tapped on both ends).
All models have auxiliary switch cams.
Fixed torque throughout the entire voltage range.
Specifications:
Application Type: Electric
Fail Safe Mode: Spring Return
Control Signal: Proportional, 135 ohm
Feedback: no
Motor Shaft: Dual ended Shaft
Stroke: Adjustable; 90 to 160 degrees, Symmetrical
Torque Rating (lb-in.): 150 lb-in
External Auxiliary Switches Available: Yes
Frequency: 50 Hz, 60 Hz
Power Consumption Driving (VA): 20 VA
Electrical Connections: Quick Connect Terminals
Shaft Dimensions (in.): .375 in
Shaft Shape: Square
Mounting: foot-mounted
Dimensions: 6 7/16 in. high x 5 1/2 in. wide x 8 3/4 in. deep
Temperature Range: -40° to 150°F
Deadweight Load on Shaft (Either End) (lb): 200 lbs
Deadweight Load on Shaft (Combined on both shafts) (lb): 300 lbs
Nominal Timing (sec): 30-60 sec
Shaft Rotation (upon control signal increase): Clockwise (as viewed from power end) (normally closed)
Need additional assistance? CONTACT US
Honeywell M9185D1004, 24V Modulating Electric Actuator, Spring Return, Foot Mounted
Write Your Own Review