Ionix PL300-2 Kit

Special Price $270.75 Regular Price $285.00
In stock
SKU
00003871

Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.

Add to Wish List
Ionix PL300-2 Kit are designed to eliminate static during normal blowoff of plastic surfaces after fabricating or before decorating.
  • Application of Ionix in plastics, fiberglass and composite industries
  • Plastics - Thermoforming, rotational molding, blow molding, foam fabricators and plastics fabricating - Ionix installed in the blow off air line for cleanup make it fast and east. Install one Ionix in each air hose.
  • Plastics - Mold release - Ionix installed in the mold release air lines to eject small or light parts. Use the HPPL300-2 for the high pressures.
  • Plastics - Resin and colorant feeding and mixing - Ionix installed in aerator air lines eliminates uneven accumulation and mixing of colorant and resins in feeding processes.
  • Plastics - Rotational molding - Blowing out the inside of mold prior to introduction of resin and colorants with Ionix prevents static which causes uneven distribution of colorant and in turn color swirl. Ionix used in blowing out complete products dislodges static plastic particles inside finished product which normal blowoff won't dislodge.
  • Fiberglass and composites de-molding - Ionix installed in the mold air lines eliminates the static created during the de-molding process. Ionix prevents ignition of hazardous release agents.
  • Plastic sign makers - Ionix installed in the blow off air line eliminates static on plastic surface prior to painting.
  • Kit includes a HPPL300-2, 25 feet of air hose and air gun. Each hose end has 1/4 inch NPT for your quick connect. Rated up to 150 psi.
  • The Ionix Model PL300-2 and HPPL300-2 are designed to eliminate static during normal blowoff of plastic surfaces after fabricating or before decorating.

    Application of Ionix in plastics, fiberglass and composite industries

    Plastics - Thermoforming, rotational molding, blow molding, foam fabricators and plastics fabricating - Ionix installed in the blow off air line for cleanup make it fast and east. Install one Ionix in each air hose.

    Plastics - Mold release - Ionix installed in the mold release air lines to eject small or light parts. Use the HPPL300-2 for the high pressures. Call for sizing.

    Plastics - Resin and colorant feeding and mixing - Ionix installed in aerator air lines eliminates uneven accumulation and mixing of colorant and resins in feeding processes.

    Plastics - Rotational molding - Blowing out the inside of mold prior to introduction of resin and colorants with Ionix prevents static which causes uneven distribution of colorant and in turn color swirl. Ionix used in blowing out complete products dislodges static plastic particles inside finished product which normal blowoff won't dislodge.

    Fiberglass and composites de-molding - Ionix installed in the mold air lines eliminates the static created during the de-molding process. Ionix prevents ignition of hazardous release agents.

    Plastic sign makers - Ionix installed in the blow off air line eliminates static on plastic surface prior to painting.

    Ionix PL300-2 kit comes with a PL300-2, 25 foot 3/8 inch hose and air gun.
    Each hose end has 1/4 inch NPT for threading your quick connect.
    Use for blow off while cleaning plastic parts. Rated up to 50 psi.
    Write Your Own Review
    You're reviewing:Ionix PL300-2 Kit
    @ 2023 Magento Demo Store. All Rights Reserved.