JD Gould Type D Bronze Solenoid Valves

Out of stock
SKU
00000821

Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.

JD Gould Type D Bronze Solenoid Valves
General Specifications
2-Way - Cast Bronze Bodies
Velvetrol Internal Piston Pilot Operated Solenoid Valves
Normally Closed or Normally Open - Full Port
Manual Open & Adjustable Closing Speed Controls
Adjustable maximum flow rates
For: General Service air-inert gases-water-oil-steam
Pressure: 5 psi differential minimum to 1200 psi maximum (300 psi max for normally open)
Temperature: -40F. min to 450F max fluid
Mounting: Install in horizontal line with coil upright and on top
Sizing
3/4” - 2” NPTF Connections
Construction
Class F or N coils are waterproof, fungus proof, molded of filled polyester with 18” leads in NEMA 1 enclosures with 1/2” conduit connector.
Bodies are globe style, sand cast in bronze, and rated to 1200 psi. 303 SS Adjustment Control Stems are sealed with graphite packing.
Bonnet assemblies are 304 SS tubes silver soldered to brass Bonnet and Tube Plug.
Piston assemblies contain brass SeatScrews in the brass Pistons with filled Teflon piston rings, stainless steel expanders. Virgin Teflon Seat Discs are held in place by brass DiscScrews. Piston Springs are 316 or 302 SS.
Pilot Assemblies contain a 416 SS armature with a 316 SS pilot point and 316 SS pins.
Specials
Buna, EP, Viton and Teflon Leak-proof SeatScrews Teflon
Buna, EP, and Viton Seat Discs
coated internal parts & other special assemblies available
Non-standard coils available with voltage, wattage, and lead wire length to your specifications
Coil enclosures meeting NEMA 4, 5, & 7
Write Your Own Review
You're reviewing:JD Gould Type D Bronze Solenoid Valves
@ 2023 Magento Demo Store. All Rights Reserved.