JD Gould Type F Bronze Solenoid Valve
Out of stock
SKU
00000822
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
JD Gould Type F Bronze Solenoid Valve
General Specifications
2-Way - Brass Angle Bodies - Packless
Direct Acting Solenoid Valves
Normally Closed or Normally Open - Fractional Port
For: General service-air-inert gases-water-light oil-steam
Pressure: Zero to 1000 psi max-depending on port size and fluid (300 psi max for normally open)
Temperature: -420F min to 450F max fluid
Mounting: Install in horizontal line with coil upright and on top
Sizing
NPTF Connections
Construction
Class F or N coils are waterproof, fungus proof, molded of filled polyester with 18” leads in NEMA 1 enclosures with _” conduit connector.
Bodies are 90 angle style, providing side inlet and bottom outlet, made of brass with a 304 SS Tube silver soldered to both the body and the brass Tube Plug.
Pilot assemblies are 416 SS Armature with a 316 SS Pilot Point and 316 SS pins.
Popular Options
Buna, EP, Viton, and Teflon Seats Teflon
coated internal parts & other special assemblies
Non-standard coils with voltage, wattage, and lead wire length to your specifications.
Coil enclosures meeting NEMA 4, 5, & 7
2-Way - Brass Angle Bodies - Packless
Direct Acting Solenoid Valves
Normally Closed or Normally Open - Fractional Port
For: General service-air-inert gases-water-light oil-steam
Pressure: Zero to 1000 psi max-depending on port size and fluid (300 psi max for normally open)
Temperature: -420F min to 450F max fluid
Mounting: Install in horizontal line with coil upright and on top
Sizing
NPTF Connections
Construction
Class F or N coils are waterproof, fungus proof, molded of filled polyester with 18” leads in NEMA 1 enclosures with _” conduit connector.
Bodies are 90 angle style, providing side inlet and bottom outlet, made of brass with a 304 SS Tube silver soldered to both the body and the brass Tube Plug.
Pilot assemblies are 416 SS Armature with a 316 SS Pilot Point and 316 SS pins.
Popular Options
Buna, EP, Viton, and Teflon Seats Teflon
coated internal parts & other special assemblies
Non-standard coils with voltage, wattage, and lead wire length to your specifications.
Coil enclosures meeting NEMA 4, 5, & 7
Write Your Own Review