JD Gould Type M Bronze Solenoid Valve

General Specifications
2-Way - Cast Bronze Bodies - Packless
Velvetrol Internal Piston Pilot Operated Solenoid Valves.
Normally Closed Only - Full Port
For: General Service air-water-light oil-steam
Pressure: 5 psi minimum to 250 psi maximum (130psi max steam)
Temperature: -420F to 356F Class N coils
Mounting: Install in horizontal line with coil upright and on top
Sizing
1/8” - 2” NPTF Connections
Construction
Class N coils are NEMA 4X, fungus proof, molded of filled polyester with 18” leads and 1/2” conduit connector.
Bodies are globe style, sand cast in bronze, and rated to 400 psi WOG.
Bonnet assemblies are 304 SS Tubes, silver soldered to brass Bonnet and Tube Plug.
Piston assemblies contain brass SeatScrew Assemblies in brass Pistons with filled Teflon piston rings, stainless steel expanders. Buna Seat Discs are held in place by brass or bronze GuideNuts. Piston Springs are 302 SS. SeatScrew
Assemblies are Buna Slugs in a brass SeatScrew, held in place with a brass Retainer.
Pilot valves are 416 SS.
Specials
EP, Viton and Teflon Leak-proof SeatScrews
EP, and Viton, and Teflon Seat Discs Teflon
coated internal parts & other special assemblies available
Non-standard coils available with voltage, wattage, and lead wire length to your specifications