Nicholson FTN Float and Thermostatic Trap
In stock
SKU
00001277
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
Nicholson FTN Float and Thermostatic Trap is designed for pressures up to 125 psig, temperatures up to 450 degrees F, four possible hook-up combinations and air venting capabilities.
The Nicholson FTN SERIES FLOAT & THERMOSTATIC STEAM TRAPS
Pressures To 125 PSIG (8.6 barg)
Temperatures to 450F (232C)
Universal Four-port Design Four possible hookup
combinations of the H pattern body and piping
dimensions similar to other major manufacturers allow
maximum installation flexibility for easy replacement of
other traps. Inlet and outlet taps on larger sized traps
located in the cover to permit larger capacities.
All Stainless Steel Internal Components Hardened
valves and seats. Extra long life and dependable
service. Resists water hammer. Protects against
erosion and corrosion.
Balanced Pressure Thermostatic Element allows
venting of non-condensibles while operating at design
pressure.
Rugged Welded Stainless Steel Element
Increases service life.
Wide Selection of Differential Pressures Sizes
3/4” to 2” available with 15, 30, 75 and 125 psig
differential pressures.
Air Line Water Removal Special configuration
FTNA optimized for compressed air service.
Repairable In-line Can be serviced without
disturbing system piping.
Pressures To 125 PSIG (8.6 barg)
Temperatures to 450F (232C)
Universal Four-port Design Four possible hookup
combinations of the H pattern body and piping
dimensions similar to other major manufacturers allow
maximum installation flexibility for easy replacement of
other traps. Inlet and outlet taps on larger sized traps
located in the cover to permit larger capacities.
All Stainless Steel Internal Components Hardened
valves and seats. Extra long life and dependable
service. Resists water hammer. Protects against
erosion and corrosion.
Balanced Pressure Thermostatic Element allows
venting of non-condensibles while operating at design
pressure.
Rugged Welded Stainless Steel Element
Increases service life.
Wide Selection of Differential Pressures Sizes
3/4” to 2” available with 15, 30, 75 and 125 psig
differential pressures.
Air Line Water Removal Special configuration
FTNA optimized for compressed air service.
Repairable In-line Can be serviced without
disturbing system piping.
Write Your Own Review