Peerless 8196 ANSI Pump

The Peerless Pump 8196 Pump
The Peerless Pump PERFORMER Series, Model
8196 ANSI standard pumps are manufactured for a wide
range of flow and head requirements and meet the latest
ASME and ANSI B73.1M specifications. The Performer
Series combines high efficiency, maximum performance,
and extended Mean Time Between Failure (MTBF) for
reduced maintenance cost.

Applications
The 8196 ANSI-standard pump will handle corrosive,
toxic and abrasive process liquids such as acids, bases
and solvents. This pump can be found in Chemical,
Petro-chemical, Pulp & Paper, Plastic, Refining and
Pharmaceutical plants. A wide range of alloys, options
and sealing systems makes it an ideal choice for almost
any application.

Features
The 8196 casing is a self venting, top centerline
discharge with a fully confined gasket. Class 150 lb.
FF flanges are standard, with optional Class 150 lb. RF
and both FF and RF Class 300 lb. flanges available. All
ductile iron and 316SS casings are supplied with casing
drains. In addition an optional Casing Wear Extender
is available on 3x4-13 and 4x6-13 MTP frame sizes and
on all XLTP frame sizes. The Wear Extender can be
provided in wear resistant materials, such as CD4MCu.
The impeller is a fully open design that significantly
reduces clogging. Integral back pump out vanes
reduce stuffing box pressure, prolonging mechanical
seal life. Impeller and casing are matched to achieve
high efficiency and low NPSH. Sealed by an o-ring,
the threaded area is protected against corrosion.
All impellers are available in optional keyed and bolted
design. A Low Flow Impeller is available for select sizes of
STP frame pumps. This Low Flow Impeller helps extend
MTBF for those applications operating far to the left of the
Best Effi ciency Point (BEP) of the standard pump.
The power end has a bearing frame made of heavy duty
cast iron (ductile iron on STP frame sizes) construction.
Designed with enlarged oil reservoir for better dissipation
of heat and bulls-eye sight glass for easy monitoring of
oil level. The bearing frame is coated internally to ensure
zero contamination of the oil or bearings from inside.
VBXD labyrinth oil seal by Inpro, designed especially
for Peerless Pump, provides both static and dynamic
sealing using contact technology to positively seal the
bearings from environmental contamination. All bearing
frames also include pre-drilled bosses for vibration
and/or temperature monitoring devices. Bearing fits
are precision bored and all bearings meet or exceed
minimum ANSI L10 life or 17,500 hours. The shaft is
available with sleeve or in solid shaft construction. All
Power Ends are backed by a 3 year warranty.

Quality Engineering
Peerless Pump designs tough, versatile products to meet
your pumping needs. The 8196 Series delivers variety,
durability, standardized options and confi gurations
unequalled in the industry.

Specifications
Capacities: .............. Up to 4500 gpm (1022 m3/hr)
Head: ........................ Up to 730 feet (222 meters)
Pressure: ................. Up to 375 psi (2586 kPa)
Horsepower: ......... Up to 300 hp (224 kW)
Temperature: ......... Up to 500 F (to 260C)
Drives: ....................... Motors, engines, steam turbine
Liquids: ..................... Chemical, pulp and paper, all process
Materials: ................. Ductile Iron, 316SS, CD4MCu, 317SS, Nickel, Alloy 20, Hastelloys, Zirconium, Titanium