QSM Tru-Flo Sanitary 2-Way Ball Valve, Tri Clamp, Virgin Teflon Cavity Filled Seats, EA-33NF-SN-CV-3/4, 3/4"
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
Tru-Flo Sanitary 2-Way Ball Valve, Tri Clamp, Virgin Teflon Cavity Filled Seats, EA-33NF-SN-CV-3/4, 3/4" are live loaded with self-adjusting packing and a design that is specifically manufactured for high cycle applications. Valves are available in sizes from 1/2" - 6" Tru-Flo products reduce the worries of routine maintenance expenses while lowering actuation costs by eliminating custom brackets and couplers. Double O-Ring protection provides additional defense against leaking through stem and lower operating torque.
This Actuator Selection is based on the following:
- Pneumatic Actuator MT Series has an aluminum body
- Comes standard with a 90° rotation, (optional rotation degrees can be requested / 120°, 135°, 150° and 180°)
- Normally Closed & Normally Open is spring actuated
- Supply Pressure to Ball Valve is 100 psig or less
- Temperature of product through the Ball Valve is Max. 400°F
- Viscosity is based on specific gravity .8 - 1.2 (water to light oils) / Contact Us for different viscosity
- For Optional Limit Switches, Solenoids & Positioners and Tubing / Contact Us for Technical Info, Prices & Delivery
Need additional assistance? CONTACT US
Need help with Sizing? Valve Inquiry Checklist
Tru-Flo Sanitary 2-Way Ball Valve, Tri Clamp, Virgin Teflon Cavity Filled Seats, EA-33NF-SN-CV-3/4, 3/4" are live loaded with self-adjusting packing and a design that is specifically manufactured for high cycle applications. Tru-Flo products reduce the worries of routine maintenance expenses while lowering actuation costs by eliminating custom brackets and couplers. Double O-ring protection provides additional defense against leaking through stem and lower operating torque.
Features & Benefits:
- Designed for high cycle automated applications
- Available in sizes 1/2" - 6"
- Highly polished internals and end caps with 8-12 Ra finish
- All materials comply with FDA, USDA & 3A requirements
- Investment cast body and end caps
- ASTM 316 stainless steel
- Standard with Tri-clamp ends
- 100% tested and inspected prior to shipping
- Full traceability of all components
- Standard seats are Teflon TFM-1600
- Cavity fillers are virgin PTFE-meets CFR 21
This Actuator Selection is based on the following:
Need additional assistance? CONTACT US