Spirax Sarco PPF Pressure Powered Pump
In stock
SKU
00000644
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
Spirax Sarco PPF Pressure Powered Pump is a non-electric pump which transfers high temperature condensate or liquids from a low point, low pressure or vacuum space to an area of higher pressure or elevation. This self-contained unit uses steam, compressed air or any suitable pressurized gas as the pumping force. Manufactured of ductile iron and available in 2" and 3" x 2", this versatile pump can handle condensate loads up to 14,800 lb/h.
The PPF-TOP provides identical performance to the standard PPF except offers the inlet and outlet to be a single point of connection located on the top of the pump body. This unique design feature adds to the versatility of the PPF.
The PPF-200 is based on the original PPF design. Here the fabricated steel body is ASME 200 psi code stamped. Although the maximum operating pressure is still 125 psi, the 200 psi code stamped body provides a safeguard against upstream component failure which may cause a high pressure to reach the pump body.
The PPF-HTF pump has been specially designed for use on two phase heat transfer fluids in a closed loop system. The self contained pump uses the pressurized heat transfer fluid vapor to transport condensed HTFs. The pump will have minor differences in appearance from the photo shown.
Need additional assistance? CONTACT US
The PPF provides the proven operating performance of the PPC in a pump which is manufactured of an ASME code stamped fabricated body.
The PPF-TOP provides identical performance to the standard PPF except offers the inlet and outlet to be a single point of connection located on the top of the pump body. This unique design feature adds to the versatility of the PPF.
The PPF-200 is based on the original PPF design. Here the fabricated steel body is ASME 200 psi code stamped. Although the maximum operating pressure is still 125 psi, the 200 psi code stamped body provides a safeguard against upstream component failure which may cause a high pressure to reach the pump body.
The PPF-HTF pump has been specially designed for use on two phase heat transfer fluids in a closed loop system. The self contained pump uses the pressurized heat transfer fluid vapor to transport condensed HTFs. The pump will have minor differences in appearance from the photo shown.
The PPF-TOP provides identical performance to the standard PPF except offers the inlet and outlet to be a single point of connection located on the top of the pump body. This unique design feature adds to the versatility of the PPF.
The PPF-200 is based on the original PPF design. Here the fabricated steel body is ASME 200 psi code stamped. Although the maximum operating pressure is still 125 psi, the 200 psi code stamped body provides a safeguard against upstream component failure which may cause a high pressure to reach the pump body.
The PPF-HTF pump has been specially designed for use on two phase heat transfer fluids in a closed loop system. The self contained pump uses the pressurized heat transfer fluid vapor to transport condensed HTFs. The pump will have minor differences in appearance from the photo shown.
Write Your Own Review