Vitec 438A Vibration Switches, Plate Mounted
In stock
SKU
Norfolk Bearing 438A
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
The Vitec 438A Electronic Vibration Switch, Plate Mounted is an economical approach to accurate and reliable vibration protection for rotating machinery.
A Full-Function, Switch-Selective Vibration Monitor
User Benefits:
- Helps eliminate catastrophic equipment failures
- Should your equipment vibration level increase, the 438A gives you notification, and can also shut down the equipment before major damage occurs.
- Allows you to plan repairs in advance
- Trending the vibration level enables you to detect changes in vibration, allowing you to schedule repairs in conjunction with your regular maintenance schedule.
- Compatible with predictive maintenance programs
- The 438A is compatible with most data collectors, analyzers and online analysis systems. Analyzing the vibration signatures allows you to find specific causes of high vibration such as imbalance, misalignment and bent shafts as well as faulty belts, bearings and gears.
- Eliminates false alarms
- The 438A replaces mechanical vibration switches that can give false alarms or trips at machine startup, or when transient vibrations from external sources occur.
- The 438A is designed to be field-configured to fit a wide variety of applications. When ordering the 438A you only need to specify the type of enclosure and the power input required.
-
Proudly made in the USA
-
Need additional assistance? CONTACT US
Features:
• Dual vibration level setpoints
• Alarm and shutdown (“Trip”) contact closures are supplied, which activate when specified vibration levels are reached or exceeded.
• Analog output
• The 438A has a 4-20 mA DC analog output proportional to the full scale range, typically connected to a PLC, DCS or chart recorder.
• AC signal output
• An AC signal output, field selectable for 100 mV/g or 100 mV/in/sec, is standard. This output is available on a terminal block for connection to a customer-supplied remote connector.
• Time delays and inhibit functions
• Each relay has an adjustable time delay ranging from 0 to 20 seconds. An inhibit function is also included, which can be used to disable relay operation during start-up transients or machine maintenance.
• Multiple configurations
• The 438A comes in three different enclosure types: NEMA 4, NEMA 4X or explosion proof. It is also available with either AC (selectable 120/240) or DC (24V) supply voltage.
Write Your Own Review