Watson McDaniel AV2000 Air Vent
In stock
SKU
00001756
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
Watson McDaniel AV2000 Air Vent is used on industrial steam applications up to 650 PSIG for the removal of air and non-condensable gases from process equipment, vessels and piping. Vent should be located at a high point in the system or vessel and can be installed in any orientation.
Features:
Welded stainless steel thermal element
Hardened stainless steel seat and valve plugs for extended service life
Integral strainer to protect from contamination
Steam pressures up to 650 psig
Special Subcool Options Available
Sizes: 1/2", 3/4"
Connections: NPT
Need additional assistance? CONTACT US
The thermostatic air vent contains a welded stainless steel thermal element that expands when heated and contracts when cooled. When air and non-condensable gases are present, the valve is in the open discharge position. When steam reaches the air vent the element expands and closes valve off tightly.
The AV2000C is used on industrial steam applications up to 650 PSIG for the removal of air and non-condensable gases from process equipment, vessels and piping.
FEATURES
Welded stainless steel thermal element
Hardened stainless steel seat and disc for extended service life
Integral strainer to protect from contamination
Steam pressures up to 650 PSIG>br>
AV2001C-12 = 1/2" npt with 3/16" orifice AV2001C-13 = 3/4" npt with 3/16" orifice
The AV2000C is used on industrial steam applications up to 650 PSIG for the removal of air and non-condensable gases from process equipment, vessels and piping.
FEATURES
Welded stainless steel thermal element
Hardened stainless steel seat and disc for extended service life
Integral strainer to protect from contamination
Steam pressures up to 650 PSIG>br>
AV2001C-12 = 1/2" npt with 3/16" orifice AV2001C-13 = 3/4" npt with 3/16" orifice
Write Your Own Review