GF Signet 9900-1BC Batch Controller System
In stock
SKU
9900-1BC GF
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
GF Signet 9900-1BC Batch Controller System provides control capability and process fine-tuning in a familiar package. The programming interface uses a four-button keypad and an intuitive menu for adjusting a batching system to the best performance possible. Choose between simple or advanced modes. In simple mode, relay outputs can be used for batching, external counter, missing signal alarm and 4 to 20 mA output can be used to indicate batch status. In advanced mode relays can also be used for end of batch pulse, two-stage shutdown, overrun alarm, high flow detection, total volume or source volume alarm.
The 9900-1BC Automatic Overrun Compensation feature can measure excess flow after a batch stops and use it to reduce flow to the next batch by de-energizing the batch relay early, thus closing the flow control valve, and eliminating batch overrun.
This is a direct replacement for the retired Signet 5600
FEATURES:
• Rear Enclosure option means the 9900-1BC Batch Controller can be installed on a pipe or wall mounted in addition to panel mount installations
• Store up to 10 batch sizes for batching or blending a variety of liquid volumes
• Customize 10 batch names for easy distinction between batches
• Modular Design - Can be purchased as a complete system or add a Batch Module and Relay Module to an existing 9900 Transmitter (Generation II or later)
• Automatic Overrun Compensation can eliminate excess flow by automatically reducing the next batch size by the overrun value of previous batch.
• Remote control wiring with start, stop & resume terminals for remote batch control
• 3 programmable relays, one open collector, two dry contact relays
• Two-stage control to prevent overfilling or to minimize water hammer
• Confirmation START/RESUME – Can prompt user prior to starting each batch with a Yes/No or password to prevent inadvertently starting a batch
• Enter 10 different K-Factors - one per batch for when different liquids are batched
Need additional assistance? CONTACT US






