Spirax Sarco HL10-130 Temperature Control
In stock
SKU
00000665
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
Spirax Sarco HL10-130 Self-acting Temperature Control is designed to use with any one of the 2-port or 3-port control valves. Self-acting controls give stable, modulating control within close tolerances. Set and forget is the normal method of using self-acting controls. Even where temperature settings must vary, operators find them quick and simple to operate. The uncomplicated construction and small number of components makes them easy to understand so that installation is straightforward.
Benefits:
Low-Installation cost
Accurate and reliable
Virtually maintenance free
Intrinsically safe operation
Simple to commission
Free from electrical or pneumatic breakdown
No expensive safety checks
Need additional assistance? CONTACT US
The Spirax Sarco HL10-130 regulator is a self-acting safeguard against overheating.
Even the best temperature controls can fail often through no fault of their own. Whatever the cause, the effect of failure can be serious and may lead to injury or even loss of life.
The Spirax Sarco HL10-130 automatically shuts off heat at its source in the event of a temperature overrun.
The type 130 control system is the sensing device and features self-acting operation and fail safe even if capillary is damaged. The HL10 snaps the isolation valve shut if the preset high limit temperature is exceeded.
The HL10 features manual reset, visual red indicator and micro switch facility for remote audio/visual indicator.
Even the best temperature controls can fail often through no fault of their own. Whatever the cause, the effect of failure can be serious and may lead to injury or even loss of life.
The Spirax Sarco HL10-130 automatically shuts off heat at its source in the event of a temperature overrun.
The type 130 control system is the sensing device and features self-acting operation and fail safe even if capillary is damaged. The HL10 snaps the isolation valve shut if the preset high limit temperature is exceeded.
The HL10 features manual reset, visual red indicator and micro switch facility for remote audio/visual indicator.
Write Your Own Review