Spirax Sarco TM600L 1/2" NPT, 600psig, Ductile Iron, Steam Thermo-matic Air Vent
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
The Spirax Sarco TM600L 1/2" NPT, 600psig, Ductile Iron, Thermo-matic Air Vents are designed for use on steam systems to remove air and other non-condensable gases, which may impair heat transfer during start-up and normal operation. The air vent should be positioned at a high point of the piping system or equipment, or where the air collects. The discharge can be hot and wet; the outlet should therefore be piped to a safe place. An isolation valve should be fitted upstream of the air vent.
Need additional assistance? CONTACT US
The Spirax Sarco TM600L 1/2" NPT, 600psig, Ductile Iron, Thermo-matic Air Vents are designed for use on steam systems to remove air and other non-condensable gases, which may impair heat transfer during start-up and normal operation. Typical application: For installation at end of all steam mains and headers, on all steam equipment such as air coils, heat exchangers, autoclaves, sterilizers, platen presses, rotating cyclinders, jacketed kettles, laundry equipment and reboilers. The air vent should be positioned at a high point of the piping system or equipment, or where the air collects. The discharge can be hot and wet; the outlet should therefore be piped to a safe place. An isolation valve should be fitted upstream of the air vent.
Need additional assistance? CONTACT US