901333 Genuine Becker vanes for DVT2.100 Oil-Less Vacuum Pump

$895.64
In stock
SKU
00000060

Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.

Add to Wish List

901333 Genuine Becker vanes for DVT2.100 Oil-Less Rotary Vane Vacuum Pump

  • Each pump takes a set of 8 carbon vanes.
  • Preventative maintenance is imperative to allow your Becker vacuum pump to have a long service life.
  • These vanes are engineered specifically for this pump.
  • 901333 - vanes for use in the Becker DVT2.100 Oil-Less Rotary Vane Vacuum Pump

    Each pump takes a quantity of eight vanes.

    Vanes should be checked at least every 500 hours of operating time and should be replaced during a vacuum pump repair.
    When replacing vanes in a Becker rotary vane vacuum pump, the entire set should be replaced. It is never a good idea to replace only one or two vanes as this will cause uneven wear and unreliable vacuum on your equipment.

    If your pump should start making ”funny” noises, chances are the bearings are starting to go out. If you do not turn the pump off and assess the problem, then your vanes could shatter causing expensive loss of production and vacuum pump repairs.

    Preventative maintenance is imperative to allow your Becker vacuum pump to have a long service life. Having critical vacuum pump parts on your shelf, including vanes and filters, will prevent costly down time.

    Control Specialties is your best source for the 901333 - vanes for use in the Becker DVT2.100 Rotary Vane Vacuum Pump as well as other related parts . On Call 24/7, with no minimum orders, same day shipping, plus repair services.

    Browse all of the Becker Pump products we offer.
    Write Your Own Review
    You're reviewing:901333 Genuine Becker vanes for DVT2.100 Oil-Less Vacuum Pump
    @ 2023 Magento Demo Store. All Rights Reserved.