Armstrong 883, D500127, 1-1/4"NPT, 250 PSI, Steam Trap

The Armstrong 883, D500127, 1-1/4"NPT, 250 PSI, Steam Trap is a steam trap constructed of cast iron, is used for horizontal installation with integral strainer.

The most reliable steam trap known, the inverted bucket, provides efficient condensate drainage of virtually all types of steam-using equipment. Put the inverted bucket to work in a tough cast iron package, and you have the best of both worlds.

Because they operate efficiently for longer periods of time, Armstrong cast iron inverted buckets add solid energy savings to lower replacement/labor costs. Armstrong cast iron inverted bucket traps are repairable for even bigger maintenance savings.
A unique leverage system multiplies the force provided by the bucket to open the valve against system pressure. The mechanism is free-floating and has no fixed pivots to create wear or friction.
Because the mechanism is located at the top of the trap, no dirt can collect on the orifice. Small particles of dirt are held in suspension until discharged by the full differential purging action when the bucket sinks, pulling the valve off the seat. The discharge orifice is surrounded by a water seal, which prevents live steam loss. Automatic air venting is provided by a small vent hole in the bucket, which provides continuous automatic air and CO2 venting at steam temperature.

Click here to browse all the Armstrong equipment Control Specialties offers.

Control Specialties is your best source for the Armstrong 883, D500127, 1-1/4"NPT, 250 PSI, Steam Trap. On Call 24/7, with no minimum orders, same day shipping, plus repair services.