Dwyer IEFS-OSB Flow Sensor
In stock
SKU
00010349
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
The Series IEFS Insertion Electromagnetic Flow Sensor comes in brass or stainless steel allowing it to handle a wide range of pressures and temperatures, as well as a variety of available saddle fittings, Series SDF, to fit pipe sizes 3 to 24". The IEFS-1XX has an isolation valve which allows hot-tap installation. Additional options for this flow meter include adapter fittings and a reverse flow output. The Series IEFS is great for "dirty" water applications or any application where moving parts may be an issue.
The Series IEFS Insertion Electromagnetic Flow Sensor comes in brass or stainless steel allowing it to handle a wide range of pressures and temperatures, as well as a variety of available saddle fittings, Series SDF, to fit pipe sizes 3 to 24". The IEFS-1XX has an isolation valve which allows hot-tap installation. Additional options for this flow meter include adapter fittings and a reverse flow output. The Series IEFS is great for "dirty" water applications or any application where moving parts may be an issue.
PRINCIPLE OF OPERATION
The IEFS is a liquid flow meter that uses a magnetic field to measure flow. As conductive fluids flow through the magnetic field, a voltage is generated which is measured and translated into a pulse frequency output signal. This signal can then be used with the Series BAT to produce a 4 to 20 mA analog signal, or the Series RTI to display rate and total.
APPLICATIONS
* Conductive Liquids
* Municipal
* Industrial
* Irrigation
ACCESSORIES
* Series BAT, Blind Analog Transmitter, converts pulse output to 4 to 20 mA analog output. Unit is loop powered, fits on the enclosure of the meter, and is field spannable.
* Series RTI, Rate Total Indicator, converts pulse output to 4 to 20 mA analog output with local flow rate and totalization display. Unit is loop powered, can fit on the enclosure of the meter, and provides a high/low flow alarm.
* Series PWD, Pulse Divider, for use with pacing electronic metering pumps. Unit divides the input frequency to any number from 1 to 9999 with the use of rotary switches to suit a number of metering pump inputs.
PRINCIPLE OF OPERATION
The IEFS is a liquid flow meter that uses a magnetic field to measure flow. As conductive fluids flow through the magnetic field, a voltage is generated which is measured and translated into a pulse frequency output signal. This signal can then be used with the Series BAT to produce a 4 to 20 mA analog signal, or the Series RTI to display rate and total.
APPLICATIONS
* Conductive Liquids
* Municipal
* Industrial
* Irrigation
ACCESSORIES
* Series BAT, Blind Analog Transmitter, converts pulse output to 4 to 20 mA analog output. Unit is loop powered, fits on the enclosure of the meter, and is field spannable.
* Series RTI, Rate Total Indicator, converts pulse output to 4 to 20 mA analog output with local flow rate and totalization display. Unit is loop powered, can fit on the enclosure of the meter, and provides a high/low flow alarm.
* Series PWD, Pulse Divider, for use with pacing electronic metering pumps. Unit divides the input frequency to any number from 1 to 9999 with the use of rotary switches to suit a number of metering pump inputs.
Write Your Own Review