Hayward 3 Way Lateral Ball Valve
In stock
SKU
00000756
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
Hayward 3 Way Lateral Ball Valve come standard with a ball that permits the flow to be diverted from the center port to either left or right ports, there is no off position. True union design makes these valves very easy to maintain by allowing for easy removal from a piping system without breaking down the piping connections. Just unscrew the three assembly nuts and lift the valve body out of the line. Also available in CPVC or EPDM seals.
Three-Way Lateral Ball Valves 1/2” to 6”, PVC or Corzan CPVC
Features:
Simplifies Lateral Connections
Replaces Valve/Tee Connections
Quick, Easy to Install
True Union End Connections
Replacement for Zero Dead-Leg Valves
PTFE Seats, FPM Seals
Options:
Valve Safe Lockout
EPDM Seals
Lateral Flow Pattern: Hayward Three-Way Lateral Ball Valves come standard with a ball that permits the flow to be diverted from the center port to either the left or right ports, there is no off position.
True Union Design: This makes these valves very easy to maintain by allowing for easy removal from a piping system without breaking down the piping connections. Just unscrew the three assembly nuts and lift the valve body out of the line.
Solid Actuator Mounting Design: For rock-solid actuator mounting, the valve incorporates a unique design whereby the mounting bracket mounts directly to the valve body. This assures proper alignment of the actuator to the valve without creating any damaging side loads to cause premature stem seal failure.
No Metal, No Corrosion: Hayward all plastic three-way valves contain no metal parts. The valves will never fail because of corrosion and they do not require painting or epoxy coating to stand up to aggressive environments.
Features:
Simplifies Lateral Connections
Replaces Valve/Tee Connections
Quick, Easy to Install
True Union End Connections
Replacement for Zero Dead-Leg Valves
PTFE Seats, FPM Seals
Options:
Valve Safe Lockout
EPDM Seals
Lateral Flow Pattern: Hayward Three-Way Lateral Ball Valves come standard with a ball that permits the flow to be diverted from the center port to either the left or right ports, there is no off position.
True Union Design: This makes these valves very easy to maintain by allowing for easy removal from a piping system without breaking down the piping connections. Just unscrew the three assembly nuts and lift the valve body out of the line.
Solid Actuator Mounting Design: For rock-solid actuator mounting, the valve incorporates a unique design whereby the mounting bracket mounts directly to the valve body. This assures proper alignment of the actuator to the valve without creating any damaging side loads to cause premature stem seal failure.
No Metal, No Corrosion: Hayward all plastic three-way valves contain no metal parts. The valves will never fail because of corrosion and they do not require painting or epoxy coating to stand up to aggressive environments.
Write Your Own Review