Hoffman TD Thermodisc traps
In stock
SKU
00001436
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
Hoffman TD Thermodisc traps are designed for high pressure steam drip and tracer lines with pressure ratings up to 600 psig and maximum temperatures up to 800 degrees F.
Series TD
The Hoffman Series TD Thermodisc traps are designed for
applications such as high-pressure steam drips and
tracer lines, or others with light to moderate loads.
Typical applications for Thermodisc traps include:
Drip traps on steam mains and supply lines
Tracer lines
Laundry and kitchen equipment
Superheated steam applications
Outdoor installations that are subject to freezing
Series TD Thermodisc Traps
Stainless steel construction resists both internal and
external corrosion
- Stainless steel cast body
- Hardened stainless steel disc is the only moving part
- Resists water hammer
Unaffected by superheated steam
Simplified installation
- Traps operate in any orientation (horizontal preferred)
- Freeze resistant when trap is piped in vertical
orientation due to self-draining design
Easy to monitor trap operation audible discharge
cycle makes checking operation simple
Operate over wide pressure range from 2 to 600 psig
(0.14 to 41.4 bar)
Operates with back pressure up to 80% of line
pressure
Maximum Pressure PMO/PMA 600 psi (41.4 bar)
Maximum Temperature TMO/TMA 800F (426C)
The Hoffman Series TD Thermodisc traps are designed for
applications such as high-pressure steam drips and
tracer lines, or others with light to moderate loads.
Typical applications for Thermodisc traps include:
Drip traps on steam mains and supply lines
Tracer lines
Laundry and kitchen equipment
Superheated steam applications
Outdoor installations that are subject to freezing
Series TD Thermodisc Traps
Stainless steel construction resists both internal and
external corrosion
- Stainless steel cast body
- Hardened stainless steel disc is the only moving part
- Resists water hammer
Unaffected by superheated steam
Simplified installation
- Traps operate in any orientation (horizontal preferred)
- Freeze resistant when trap is piped in vertical
orientation due to self-draining design
Easy to monitor trap operation audible discharge
cycle makes checking operation simple
Operate over wide pressure range from 2 to 600 psig
(0.14 to 41.4 bar)
Operates with back pressure up to 80% of line
pressure
Maximum Pressure PMO/PMA 600 psi (41.4 bar)
Maximum Temperature TMO/TMA 800F (426C)
Write Your Own Review