Keckley Style F-300, 1/4" NPT Y-strainer
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
Keckley Style F-300, 1/4" NPT Y-strainer are constructed from the finest bronze castings and are machined to exacting specifications. Solder Joint Ends are in compliance with ASME B16.18 unless otherwise specified. Keckley Style F-300 & E-300 strainers feature a machined seat in the body and cap for proper alignment and to ensure accurate reseating when servicing is required. These strainers have a straight threaded cap and are furnished standard with a NPT blow-off connection. The gasket is a flat copper gasket that is compressed between the body and cap for maximum strength and durability. Keckley Style F-300 & E-300 strainers can be furnished with a bronze blow-off plug upon request.
Need additional assistance? CONTACT US
Keckley Style F-300, 1/4" NPT Y-strainer
Cast Bronze Y-Strainer
APPLICATIONS
Steam, water, oil or gas where protection from foreign matter in a pipeline is required.
CONSTRUCTION
The Keckley Style F-300 & E-300 strainers are constructed from the finest bronze castings and are machined to exacting specifications.
Solder Joint Ends are in compliance with ASME B16.18 unless otherwise specified.
FEATURES
The Keckley Style F-300 & E-300 strainers feature a machined seat in the body and cap for proper alignment and to ensure accurate reseating when servicing is required. These strainers have a straight threaded cap and are furnished standard with a NPT blow-off connection. The gasket is a flat copper gasket that is compressed between the body and cap for maximum strength and durability. Keckley Style F-300 & E-300 strainers can be furnished with a bronze blow-off plug upon request.
SCREENS
Standard perforated brass screens are spot welded along the seam for maximum strength. Different size perforations and meshes are available in brass, stainless steel, and monel to meet specific media requirements. If media is not indicated, screens for water will be supplied.
SELF CLEANING
Self cleaning is accomplished by opening the valve or drain plug connected to the blow-off port. Warning: See Maintenance Instructions on page S6 of the Strainer Information Section for additional precautions and detailed information on servicing the strainer.