Keckley Style SB-7, 1-1/2" NPT SW Y-Strainer
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
Keckley Style SB-7, 1-1/2" NPT SW Y-Strainers are constructed from rugged carbon steel castings and are machined to exacting specifications. Socket Weld bore is in compliance with ASME B16.11 unless otherwise specified. Keckley Style SB-7, 1-1/2" NPT SW Y-Strainer features a machined groove in the body and cap for proper alignment and to ensure accurate reseating when servicing is required. This strainer has a straight threaded cap and is furnished standard with a NPT blow-off connection. The gasket is 304 stainless steel spiral wound and is compressed between the body and cap (for maximum strength and durability) and designed for both high pressure and high temperature service. Keckley Style SB-7 strainers can be furnished with a carbon steel blow-off plug upon request.
Need additional assistance? CONTACT US
APPLICATIONS
Steam, water, oil or gas where protection from foreign matter in a pipeline is required.
CONSTRUCTION
The Keckley strainers are constructed from rugged carbon steel castings and are machined to exacting specifications.
Socket Weld bore is in compliance with ASME B16.11 unless otherwise specified.
FEATURES
The Keckley Style SB-7, 1-1/2" NPT SW Y-Strainer features a machined groove in the body and cap for proper alignment and to ensure accurate reseating when servicing is required. This strainer has a straight threaded cap and is furnished standard with a NPT blow-off connection. The gasket is 304 stainless steel spiral wound and is compressed between the body and cap (for maximum strength and durability) and designed for both high pressure and high temperature service. Keckley Style SB-7 strainers can be furnished with a carbon steel blow-off plug upon request.
SCREENS
Standard perforated 304 stainless steel screens are spot welded along the seam for maximum strength. Different size perforations and meshes are available in stainless steel, monel, and brass to meet specific media requirements. If media is not indicated, screens for steam will be supplied.
SELF CLEANING
Self cleaning is accomplished by opening the valve or drain plug connected to the blow-off port. Warning: See Maintenance Instructions on page S6 of the Strainer Information Section for additional precautions and detailed information on servicing the strainer.