Kunkle Models 912, 913, 918, 919
In stock
SKU
00000531
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
Kunkle Models 912, 913, 918, 919
Model 912: Full nozzle design. SS warn ring and disc with brass/bronze base. Bronze/brass body and bonnet.
Model 913: Full nozzle design. Bronze/brass body and bonnet. 316 SS trim (base, disc and disc holder).
Model 918: Same as Model 912 except resilient seat/seal. Superior ’leak-free’ performance.
Model 919: Same as Model 913 except resilient seat/seals. Superior ’leak-free’ performance. Bronze body and bonnet. 316 SS trim (base, disc and disc holder).
Model 912: Full nozzle design. SS warn ring and disc with brass/bronze base. Bronze/brass body and bonnet.
Model 913: Full nozzle design. Bronze/brass body and bonnet. 316 SS trim (base, disc and disc holder).
Model 918: Same as Model 912 except resilient seat/seal. Superior ’leak-free’ performance.
Model 919: Same as Model 913 except resilient seat/seals. Superior ’leak-free’ performance. Bronze body and bonnet. 316 SS trim (base, disc and disc holder).
Model 912, Model 913, Model 918, Model 919
ASME Section VIII, Steam/Air/Gas/Liquid, ’UV’ National Board Certified. Also available for Vacuum Service.
Model Descriptions
Model 912: Full nozzle design. SS warn ring and disc with brass/bronze base. Bronze/brass body and bonnet.
Model 913: Full nozzle design. Bronze/brass body and bonnet. 316 SS trim (base, disc and disc holder).
Model 918: Same as Model 912 except resilient seat/seal. Superior ’leak-free’ performance.
Model 919: Same as Model 913 except resilient seat/seals. Superior ’leak-free’ performance. Bronze body and bonnet. 316 SS trim (base, disc and disc holder).
Pressure and Temperature Limits
Models 912, 913, 918, 919 - Steam 3 to 250 psig -60 to 406F
Models 912, 918 - Air/Gas/Liquid 3 to 300 psig -60 to 406F
Models 913, 919 - Air/Gas/Liquid 3 to 900 psig -60 to 406F
Vacuum 6 through 29-inch HG - 300F
Maximum back pressure 50 psig - threaded cap and packed lever.
Applications
Air/gas compressors - intercoolers - aftercoolers.
Liquid filled pressure vessels/systems - ASME Section VIII (UV)
Pressure vessels - containing gas, air, liquid or steam. Including tanks and receivers.
Vacuum systems including pumps, tanks and equipment.
Optional materials for low temperature - cryogenic applications
Oil/gas separators.
Overpressure relief and protection of pumps, tanks, lines, and hydraulic systems.
By-pass relief or pressure regulation.
Options
Threaded cap
Threaded cap with gag
Plain lever
Plain lever with gag
Plain lever with vibration dampener
Packed lever
Packed lever
Packed lever with gag
Features and Benefits
Available with soft seat.
Threaded cap is standard (back pressure tight).
Hex on valve nozzle provides for easy installation.
Single control ring offers easy adjustability of blowdown.
Pivoting disc design corrects misalignment and offers exceptional performance.
Guide to nozzle ratio reduces friction
Full nozzle design for optimum flow performance.
Threaded side outlet for piped off discharge to eliminate fugitive emissions.
Control Specialties is your best source for the Kunkle Models 912, 913, 918, 919. On Call 24/7, with no minimum orders, same day shipping, plus repair services.
ASME Section VIII, Steam/Air/Gas/Liquid, ’UV’ National Board Certified. Also available for Vacuum Service.
Model Descriptions
Model 912: Full nozzle design. SS warn ring and disc with brass/bronze base. Bronze/brass body and bonnet.
Model 913: Full nozzle design. Bronze/brass body and bonnet. 316 SS trim (base, disc and disc holder).
Model 918: Same as Model 912 except resilient seat/seal. Superior ’leak-free’ performance.
Model 919: Same as Model 913 except resilient seat/seals. Superior ’leak-free’ performance. Bronze body and bonnet. 316 SS trim (base, disc and disc holder).
Pressure and Temperature Limits
Models 912, 913, 918, 919 - Steam 3 to 250 psig -60 to 406F
Models 912, 918 - Air/Gas/Liquid 3 to 300 psig -60 to 406F
Models 913, 919 - Air/Gas/Liquid 3 to 900 psig -60 to 406F
Vacuum 6 through 29-inch HG - 300F
Maximum back pressure 50 psig - threaded cap and packed lever.
Applications
Air/gas compressors - intercoolers - aftercoolers.
Liquid filled pressure vessels/systems - ASME Section VIII (UV)
Pressure vessels - containing gas, air, liquid or steam. Including tanks and receivers.
Vacuum systems including pumps, tanks and equipment.
Optional materials for low temperature - cryogenic applications
Oil/gas separators.
Overpressure relief and protection of pumps, tanks, lines, and hydraulic systems.
By-pass relief or pressure regulation.
Options
Threaded cap
Threaded cap with gag
Plain lever
Plain lever with gag
Plain lever with vibration dampener
Packed lever
Packed lever
Packed lever with gag
Features and Benefits
Available with soft seat.
Threaded cap is standard (back pressure tight).
Hex on valve nozzle provides for easy installation.
Single control ring offers easy adjustability of blowdown.
Pivoting disc design corrects misalignment and offers exceptional performance.
Guide to nozzle ratio reduces friction
Full nozzle design for optimum flow performance.
Threaded side outlet for piped off discharge to eliminate fugitive emissions.
Control Specialties is your best source for the Kunkle Models 912, 913, 918, 919. On Call 24/7, with no minimum orders, same day shipping, plus repair services.
Write Your Own Review