Magnatrol Type A Full Port Solenoid Valve

Type A Full Port - Normally Closed
Internal Pilot Operated

Operation: Valve opens when energized and closes when de-energized.

Pipe Size: 1/2 in. to 3 in.
Max. Fluid Temp.: 212 deg. F
Max. Static Pressure: 300 psi, except valves listed for 500 PSI diff.

Construction:
*Valve Body - Cast Bronze, Globe Pattern
*Piston - Cast Bronze
Coil Enclosure - Malleable or Cast Iron
*Plunger - 430 Stainless Steel
*Pilot Valve - 303 Stainless Steel
*Bonnet Tube - 304 Stainless Steel
*Spring - 302 Stainless Steel
*Body Seal - Buna N or Non Asbestos Gasket
*Orifice Seal - Buna N (Viton or Glass Filled Teflon available)
*AC Shading Coil - Copper
*Stem Pin - Inconel
Coil - Encapsulated, Class A, 18” Leads (Class H Available)
* Wetted parts in contact with fluid

Application: To control the flow of water, oil, air, gas, solvents, brine, vacuum and any other fluids not reactive with construction materials and free of sediment. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top.

NO DIFFERENTIAL PRESSURE REQUIRED TO OPEN