Magnatrol Type L Full Port Solenoid Valve
In stock
SKU
00000813
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
Magnatrol Type L Full Port Solenoid Valve
Type L Full Port - Normally Closed
Internal Pilot Operated
Operation: Valve opens when energized and closes when de-energized.
Pipe Size: 1/2 in. to 3 in.
Max. Fluid Temp.: 400 deg. F
Max. Static Pressure: 300 psi, Except valves listed for 500 PSI diff.
Construction:
*Valve Body - Cast Bronze, Globe Pattern
*Piston - Cast Bronze
Coil Enclusure - Malleable or Cast Iron
*Plunger - 430 Stainless Steel
*Pilot Valve - 303 Stainless Steel
*Bonnet Tube - 304 Stainless Steel
*Spring - Inconel
*Body Seal - Non Asbestos Gasket
*Orifice Seal - Glass Filled Teflon
*AC Shading Coil - Copper
*Stem Pin - Inconel
Coil - Encapsulated, Class H, 18” Leads
* Wetted parts in contact with fluid
Application: To control the flow of hot liquids, hot gases, cryogenics and any other fluids not reactive with construction materials and free of sediment. Cryogenic fluids include liquid oxygen (-297 deg. F), liquid argon (-303 deg. F), and liquid nitrogen (-320 deg. F). Cryogenic valves are degreased and cleaned to keep them free of moisture. Oxygen valves are ”black light” tested. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top.
FOR STEAM APPLICATION SEE TYPE S.
Internal Pilot Operated
Operation: Valve opens when energized and closes when de-energized.
Pipe Size: 1/2 in. to 3 in.
Max. Fluid Temp.: 400 deg. F
Max. Static Pressure: 300 psi, Except valves listed for 500 PSI diff.
Construction:
*Valve Body - Cast Bronze, Globe Pattern
*Piston - Cast Bronze
Coil Enclusure - Malleable or Cast Iron
*Plunger - 430 Stainless Steel
*Pilot Valve - 303 Stainless Steel
*Bonnet Tube - 304 Stainless Steel
*Spring - Inconel
*Body Seal - Non Asbestos Gasket
*Orifice Seal - Glass Filled Teflon
*AC Shading Coil - Copper
*Stem Pin - Inconel
Coil - Encapsulated, Class H, 18” Leads
* Wetted parts in contact with fluid
Application: To control the flow of hot liquids, hot gases, cryogenics and any other fluids not reactive with construction materials and free of sediment. Cryogenic fluids include liquid oxygen (-297 deg. F), liquid argon (-303 deg. F), and liquid nitrogen (-320 deg. F). Cryogenic valves are degreased and cleaned to keep them free of moisture. Oxygen valves are ”black light” tested. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top.
FOR STEAM APPLICATION SEE TYPE S.
Write Your Own Review