Nicholson TA Series Thermostatic Traps
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
Nicholson TA Series Thermostatic Traps are designed with a stainless steel body and designed for pressures up to 650 psig and temperatures up to 750 degrees F. Freeze-proof self-draining when installed vertically with 3 year guarantee against defective materials or workmanship.
The Nicholson TA Series Thermostatic Steam Traps
Pressures To 650 PSIG (44.8 barg)
Temperatures to 750F (400C)
Sealed Stainless Steel Body Lightweight, compact
and corrosion resistant. No bolts or gaskets. Eliminates
body leaks.
Self Centering Valve Leak tight shutoff. Improved
energy savings. Assembly of actuator and valve to
impingement plate allows valve to self-align with center
of valve seat orifice. Provides long lasting valve and seat.
Temperature Sensitive Actuators One moving part.
Stainless Steel, fail open or fail closed, welded actuator
for maximum corrosion, thermal and hydraulic shock
resistance.
For Superheated Steam Applications Because the
trap closes at saturated steam temperature, superheated
steam cannot reach trap.
Thermal and Hydraulic Shock Resistant
Impingement plate plus welded construction prevent
damage to actuator.
Hardened Stainless Steel Valve and Seat Long life.
Lapped as a matched set for water tight seal.
Inexpensive Low initial cost.
Maintenance Free Sealed unit. Replacement traps
cost less than repair of more expensive in-line repairable
traps.
Freeze Proof Self draining when installed vertically.
Directional Discharge Pipe thread erosion prevented
by directing discharge to center of pipe.
Air Vent Efficient steam service air vent when
equipped with ISO Bellows and installed in air vent
location.
Guaranteed Guaranteed against defects in materials
or workmanship for 3 years.