Robertshaw Model VC-210-BNS, 1"NPT, 3-way action Mini-Max Diaphragm Control Valve is a molded 10 sq. Inch Buna-N 2-ply Dacron reinforced diaphragm enclosed in a die-cast aluminum housing and frame. The accessible spring adjusting nut provides easy field adjustment of the starting point within the selected spring range. Synthane gaskets located between the bonnet and the actuator frame reduce heat transfer to the diaphragm.
Outstanding Features
Full Ported or Low Flow Designs
Direct and Reverse-Acting Valve Styles 1/2" 3/4" 1"
Molded Diaphragm - Reinforced
"Packless" Stem Seal
Two-Way and Three-Way Valves
Stainless Steel Investment Castings
Designed for the control of water, steam, gas or vacuum
Accessories Available
VC-210 Control Valves are available with the Model P-2 positioner or No. 84589-A2, 110 VAC solenoid valve mounted on the valve and pre-piped to the actuator.
Pneumatic Transducers - Models 443A and 445A / convert DC current signal to a proportional pneumatic signal
Robertshaw has been supplying products to the industrial and HVAC control markets since 1904 that meet demanding customer requirements for most types of process control. Their products are manufactured in an ISO 9001 facility in Maryville, TN.
One of the many control valves Robertshaw offers is the VC-210-BNS, 1"NPT, 3-way action, Mini-Max Diaphragm Control Valve. The VC-210-BNS is built with stainless steel castings especially designed for the control of water, steam, gas, vacuum, etc. The Mini-Max is a single seated, bellows sealed valve to prevent stem leakage.
The Mini-Max actuator is enclosed in a rugged housing and frame with an accessible spring adjusting nut to provide for easy field adjustment. Synthane gaskets are located betwen the valve bonnet and actuator to reduce heat transfer to the diaphragm.
The Mini-Max is available in a two-way and three-way configuration with direct and reverse actuation.