UE Systems UP100C Ultraprobe 100 Kit

UE Systems UP100C Ultraprobe 100 pistol housing with LED bargraph meter, 8 position sensitivity selection, low battery indicator, scanning module, rubber focusing probe, stethoscope module, warble tone generator with battery recharger, lightweight foam lined headset, 9 volt alkaline battery (replaceable), cordura/nylon soft pack and comprehensive instruction manual. A practical tool for any leak detection, steam trap inspection or troubleshooting program. Ultrasound instruments can be used in noisy environments. Applications:

Valve seat leak detection

Steam trap inspection

Bearing testing

Gear/gear box inspection

General mechanical inspection and trouble shooting Features:

32 degrees-120 degrees F Operating Temperature Range

300 m seconds Response Time

5.25" x 2" x 8" Dimensions

Headset noise isolating type: double headset wired monophonic impedance; 16 ohms, over 23 dB noise attenuation.

Simple to use - find compressed air and steam leaks and prevent machinery failure

Ultrasound is very directional and localized

Ultrasound can be easily blocked or shielded

Changes in ultrasound provide early warning of potential problems

8-position sensitivity dial with decibel indications

LED bar graph display in which each LED equals approximately 3 dB - ideal for calculating decibel level

Need additional assistance? CONTACT US