Valtorc Series 1500 AWWA Butterfly Valve
In stock
SKU
00010333
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
Valtorc AWWA Series 1500 Butterfly Valve are general use (American Water Works Act) AWWA valves that are available in sizes 3" - 24" in a double flanged, mechanical join styles. Bi-directional design with 304 or 316 stainless steel with 150 psig, 250 psig working pressure; Epoxy coated ductile iron with 304 or 316 stainless steel disc. EPDM, BUNA N, Viton, Silicone and various other seat materials available.
Features:
Available double flanged, mechanical join
Size range from 3" to 24"
Available with cast iron, ductile iron body styles that conform to AWWA C504 specifics
Two part polyester Epoxy body coating
Epoxy coated ductile iron discs with 304 stainless steel or optional 316 stainless steel disc edge; all 304SS or 316SS coatings
Valve stems available in either 304 stainless steel or 316 stainless steel
Tapered bolts with locking nut offer valve stem retention
Working pressure: 150 psig, 250 psig
Bi-directional shutoff
All valves are hydrostatic and leak tested per AWWA standards
EPDM seats and seals available
Need additional assistance? CONTACT US
Valtorc AWWA Series 1500 Butterfly Valves
* Sizes: 3" through 24"
* Styles : Double Flanged , Mechanical Joint
* Bodies : Cast Iron, Ductile Iron, Built in Conformance to AWWA Specifications
* Body Coating : Two Part Polyester Epoxy
* Discs : Epoxy Coated Ductile Iron with 304SS or 316SS Disc Edge, All 304SS or 316SS, Coatings per NSF - 61 Standards
* Seats : EPDM , Buna N, Viton, Hypalon, Silicone, Neoprene, One-Piece Fusion Bonded Covering the Interior Body
* Stems : 304SS, 316SS
* Stem Retention : Tapered Bolt(s) with Locking Nut
* Bearings : Bronze 2 - Top and 1 - Bottom
* Working Pressures : 150 psig, 250 psig, Bi - Directional Shutoff
* Sizes: 3" through 24"
* Styles : Double Flanged , Mechanical Joint
* Bodies : Cast Iron, Ductile Iron, Built in Conformance to AWWA Specifications
* Body Coating : Two Part Polyester Epoxy
* Discs : Epoxy Coated Ductile Iron with 304SS or 316SS Disc Edge, All 304SS or 316SS, Coatings per NSF - 61 Standards
* Seats : EPDM , Buna N, Viton, Hypalon, Silicone, Neoprene, One-Piece Fusion Bonded Covering the Interior Body
* Stems : 304SS, 316SS
* Stem Retention : Tapered Bolt(s) with Locking Nut
* Bearings : Bronze 2 - Top and 1 - Bottom
* Working Pressures : 150 psig, 250 psig, Bi - Directional Shutoff
Write Your Own Review