Watson McDaniel FDA600 Thermostatic Clean Steam Trap
In stock
SKU
00000313
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
Watson McDaniel FDA600 Thermostatic Clean Steam Trap is used on clean steam applications as drip traps, drainage for CIP/SIP systems and various process vessels.
Features:
All wetted parts are 316L stainless steel
Operates close to saturation curve to minimize condensate back-up
Completely self-draining in the vertical downward flow orientation
Need additional assistance? CONTACT US
The Watson McDaniel FDA600 Steam Traps are used on clean steam applications as drip traps on piping runs as well as drainage for CIP/SIP systems and various process vessels.
HOW IT WORKS
The thermostatic trap contains a welded 316L stainless steel thermal element that expands when heated and contracts when cooled. When air and condensate are present the trap is in the open discharge position. When steam reaches the trap the element expands closing the trap tightly.
FEATURES
* All wetted parts are 316L stainless steel
* Operates close to saturation curve to minimize condensate back-up
* Completely self-draining in the vertical downward flow orientation
INSTALLATION
The trap is designed for installation in a vertical, downward flow orientation to ensure that the self-draining clean steam requirement is satisfied. Isolation valves should be installed for maintenance purposes. For welded installations removal of the body gasket and thermal element is necessary.
MAINTENANCE
Dirt is the most common cause of premature failure. Therefore, the upstream strainer should be periodically cleaned. For full maintenance details see Installation and Maintenance Manual.
MATERIALS
Body Stainless Steel, AISI 316L
Thermal Element Stainless Steel, AISI 316L
O-Ring, FDA Grade Teflon Coated Silicone/FEP
Nuts & Bolts Stainless Steel, AISI 316L
HOW IT WORKS
The thermostatic trap contains a welded 316L stainless steel thermal element that expands when heated and contracts when cooled. When air and condensate are present the trap is in the open discharge position. When steam reaches the trap the element expands closing the trap tightly.
FEATURES
* All wetted parts are 316L stainless steel
* Operates close to saturation curve to minimize condensate back-up
* Completely self-draining in the vertical downward flow orientation
INSTALLATION
The trap is designed for installation in a vertical, downward flow orientation to ensure that the self-draining clean steam requirement is satisfied. Isolation valves should be installed for maintenance purposes. For welded installations removal of the body gasket and thermal element is necessary.
MAINTENANCE
Dirt is the most common cause of premature failure. Therefore, the upstream strainer should be periodically cleaned. For full maintenance details see Installation and Maintenance Manual.
MATERIALS
Body Stainless Steel, AISI 316L
Thermal Element Stainless Steel, AISI 316L
O-Ring, FDA Grade Teflon Coated Silicone/FEP
Nuts & Bolts Stainless Steel, AISI 316L
Write Your Own Review