Watson McDaniel PMPC Pressure Motive Pump
In stock
SKU
00000317
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
The Watson McDaniel PMPC Series is a Cast Ductile Iron pump body material with a vented receiver. Standardized Simplex, Duplex, Triplex and Quadraplex packaged systems include stand-alone pump(s), check valves and vented receiver, mounted on a steel base and frame. Multiple pumping units can be used for increased capacity or for system redundancy.
**System only requires 4 pipe connection.**
The PMP units are also available in ductile iron, carbon steel and stainless steel. Additional options include sight glasses, insulation jackets, cycle counters, motive and vent piping, pressure regulators, steam traps, strainers, ASME code stamps, etc.
Included: Heavy-Duty Pump, Steel Receiver, Isolation Valve(s), SS Check Valves, Schedule 40 Piping and mounted on a Steel Base.
Need additional assistance? CONTACT US
The PMPC pressure motive pump body & cover are manufactured from ductile iron.
ASME UM code stamp available.
This pump is typically used when liquids must be moved to higher elevation, higher pressure or extended distances.
FEATURES
* Equipped with our Patented Snap-Assure Mechanism which extends the useful life of the pump
* Mechanism incorporates heat-treated stainless steel wear items
* All stainless steel internals for ultimate corrosion resistance
* Dual compression springs made from Inconel-X-750 for high-temperature corrosive service.
* Operates using steam, air, nitrogen or other pressurized gases as the motive force
* Non-Electric can be used in remote locations or
NEMA 4, 7, 9 & hazardous areas
MATERIALS
Body & Cover Ductile Iron
Cover Gasket Garlock
Cover Bolts Steel
Inlet Valve Hardened Stainless Steel 40 Rc
Vent Valve Hardened Stainless Steel 40 Rc
Mechanism Yoke 304 Stainless Steel
Ball Float 304 Stainless Steel
Check Valves Stainless Steel
Springs Inconel-X-750
Other Internal Comp Stainless Steel
ASME UM code stamp available.
This pump is typically used when liquids must be moved to higher elevation, higher pressure or extended distances.
FEATURES
* Equipped with our Patented Snap-Assure Mechanism which extends the useful life of the pump
* Mechanism incorporates heat-treated stainless steel wear items
* All stainless steel internals for ultimate corrosion resistance
* Dual compression springs made from Inconel-X-750 for high-temperature corrosive service.
* Operates using steam, air, nitrogen or other pressurized gases as the motive force
* Non-Electric can be used in remote locations or
NEMA 4, 7, 9 & hazardous areas
MATERIALS
Body & Cover Ductile Iron
Cover Gasket Garlock
Cover Bolts Steel
Inlet Valve Hardened Stainless Steel 40 Rc
Vent Valve Hardened Stainless Steel 40 Rc
Mechanism Yoke 304 Stainless Steel
Ball Float 304 Stainless Steel
Check Valves Stainless Steel
Springs Inconel-X-750
Other Internal Comp Stainless Steel
Write Your Own Review