Watson McDaniel UFT450 Float & Thermostatic Module
In stock
SKU
00000308
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
Watson McDaniel UFT450 Float & Thermostatic Module can be mounted on an universal connector and can be used on small process equipment which generate light condensate loads. F&T traps have excellent air handling capability.
Features:
• Trap module can be easily removed and replaced in minutes without having to disconnect any piping
• Hardened stainless steel valves and seat
• Freeze-resistant
• Connectors available with integral strainers and blowdown valves
• 360º swivel design for convenient installation
Need additional assistance? CONTACT US
The Watson McDaniel UFT450 Float & Thermostatic trap module mounted on a universal connector is typically used on process equipment that generate light condensate loads and require excellent air handling capabilities. These low capacity float & thermostatic trap modules can also be used in drip service on steam mains, tracer systems and steam supply lines.
HOW IT WORKS
The universal connector is permanently installed into the pipeline where the steam trap would normally be placed. The trap module is bolted to the universal connector with two bolts and sealed with a gasket. When a new trap module is needed, it can be easily removed and replaced with a standard open-end or socket wrench without disturbing the existing piping.
INSTALLATION & MAINTENANCE
Universal connectors can be installed in any position. Installation should include isolation valves. For full maintenance details, see Installation and Maintenance Manual.
OPTIONS
Universal Connector are available with an integral strainer and blow-down valve. Connector is purchased separately.
FEATURES
* Trap module can be easily removed and replaced in minutes without having to disconnect any piping
* Hardened stainless steel valves and seat
* Freeze resistant
* Connectors available with integral strainers and blow-down valves
* 360 swivel design for convenient installation
HOW IT WORKS
The universal connector is permanently installed into the pipeline where the steam trap would normally be placed. The trap module is bolted to the universal connector with two bolts and sealed with a gasket. When a new trap module is needed, it can be easily removed and replaced with a standard open-end or socket wrench without disturbing the existing piping.
INSTALLATION & MAINTENANCE
Universal connectors can be installed in any position. Installation should include isolation valves. For full maintenance details, see Installation and Maintenance Manual.
OPTIONS
Universal Connector are available with an integral strainer and blow-down valve. Connector is purchased separately.
FEATURES
* Trap module can be easily removed and replaced in minutes without having to disconnect any piping
* Hardened stainless steel valves and seat
* Freeze resistant
* Connectors available with integral strainers and blow-down valves
* 360 swivel design for convenient installation
Write Your Own Review