Watson McDaniel WPT Pump & Trap Combination
In stock
SKU
00000325
Product Shipping Subject to Factory Availability Need Specifications? See PDF Section Below.
Watson McDaniel WPT Pump & Trap Combination are excellent for draining condensate from heat exchangers and other equipment whose steam pressure is modulating by a temperature regulator or a temperature control valve. The WPT Series are stand-alone pump units with an appropriately sized external steam trap pre-assembled at factory and mounted on a common base plate, allowing for simple installation. Includes: Body, Cover, Internal mechanism, Check valves and External Steam Trap.
Features:
Pump and Steam Trap are pre-mounted together on a single base for easy installation
Higher capacities than pump-trap combinations with internal steam traps (PMPT)
Engineering and selection is simplified using a pre-mounted system
316 Stainless Steel Body and Internal
Need additional assistance? CONTACT US
Watson McDaniel WPT Series Pump/Trap combination simplify selection and installation of pressure motive pumps. Five size ranges available up to 13,000 lbs/hr of condensate load.
TYPICAL APPLICATIONS
The Watson McDaniel WPT Pump-Trap Combination are excellent for draining heat exchangers or other equipment that is being fed by a temperature regulator or a temperature control valve. In these applications, the steam pressure in the heat exchanger may not be sufficient to overcome the back pressure in the condensate return line. When this condition occurs, the pressure powered pump takes over and uses high pressure steam supplied to the pump to discharge the condensate through the trap. When sufficient pressure does exist, the system functions like a standard steam trap.
PUMP-TRAP FEATURES
* Steam trap and pump are pre-mounted together on a single base for easy installation
* Engineering and selection is simplified.
TYPICAL APPLICATIONS
The Watson McDaniel WPT Pump-Trap Combination are excellent for draining heat exchangers or other equipment that is being fed by a temperature regulator or a temperature control valve. In these applications, the steam pressure in the heat exchanger may not be sufficient to overcome the back pressure in the condensate return line. When this condition occurs, the pressure powered pump takes over and uses high pressure steam supplied to the pump to discharge the condensate through the trap. When sufficient pressure does exist, the system functions like a standard steam trap.
PUMP-TRAP FEATURES
* Steam trap and pump are pre-mounted together on a single base for easy installation
* Engineering and selection is simplified.
Write Your Own Review